Rack Cabinets & Panels

Indoor / Outdoor Air Conditioned Rack Cabinets

Indoor / Outdoor Air Conditioned Rack Cabinet - Manufactured in 2000 by Prologic Controls.

External Dimensions: 84" wide including Air Conditioner & Electrical Panel, 31-1/2" deep x 78" high + 6" for HD Pallet (84" Total) + 3" for lift eyes.
Internal Equipment Space: 2 swinging 19" racks, 56" high up to 24" available depth.
• Air Conditioned with 6000 BTU McLean 110v unit
• Heavy steel construction - white powder coated in / out
• Both equipment racks pivot / swing out 90°
• Weather-proof cabinet is insulated and provides remote server space in dusty warehouses or outdoors. NEMA 4 outdoor weather proof rating.
• 20 various breakers on DC side for chargers and battery banks
• Large AC Service cabinet with breaker panel including two 15 amp, four 20 amp and one 100 amp main breaker. Possible uses include: Remote cellular cabinet, server cabinet, additional computer space.
• 1,500 pounds. Shipped bolted to H.D. pallet.
• Large full width battery compartment.

Click Here for more information on the PLC-2450 Power Supply

Click Here for more information on the Sinclair 4 Channel Receiver Multi-Coupler

$5,995 each - $4,995 (4+)

Southwest Data Products
19" Rack Mount Cabinet

(ENC) 100274-SC
  • Description & Shipping Information
  • Specifications

The perfect rack cabinet. Brand new factory wrapped and palletized! We started out with 1,200 SW Data cabinets and we are down to about 400. They are going fast so don't pass up your chance to solve your data rack cabinet needs with the best value around!

Call or e-mail for exact shipping quotes.  61 Cabinets = 1 Truck Load.

• Standard 19" rack width
• Louvered, ventilated, locking front & rear doors. Includes 4 keys
• Removable side panels for easy access
• Fully adjustable #10-32 tapped rails opening can be adjusted from 6" to 28"
Outside Dimensions: 82.062" tall, 22.06" wide, 30" deep
• 77" vertical panel space (44 rack spcs)
• Seismic Zone 4 rated
• Four point leveling
• Acid resistant battery tray (not shown). Discard battery tray to move vertical rails to front or rear of cabinet.
• 345 pounds shipping weight
• Normal price range $1200-$1400 each

$550 each - $419 (3+), $375 (12+)

Set of 4 Heavy Duty Casters for 19" Rack Mount Cabinet

(ENC) 100274-CS
Set of 4 heavy duty swivel casters with mounting hardware. Bolts up to existing brackets on cabinet bottom. Performa rubber.
Load Capacity: 140 lbs
Wheel Width: 1.25 in.
Wheel Bearing: Delrin
Non-marking: Yes
Swivel Radius: 2.4063 in.
Rig Material: Steel
Kingpin Type: Steel Rivet
Mounting Type: Top Plate
Bolt Hole Pattern: 1.75 in x 3 in
Wheel: 2.00002.441
Axle Diameter: 0.375 in
Wheel Diameter: 2.5 in
Wheel Face: Flat
Wheel Durometer: 65 (±5), Shore A Scale
Wheel Color: Grey / Grey
Overall Height: 3.875 in
Rig Finish: Zinc Plating
Rig Construction: King Pin
Raceway: Double Ball
Top Plate Dimensions: 2.5 in x 3.625 in
Bolt Hole Size: 0.375 in
$79 per set of 4

Gray Steel 19"
Rack Cabinet

(ENC) 614G
Dehler gray steel 19" rack cabinet. Front and rear louvered doors with adjustable louver covers inside. Rails are screwed to drilled and tapped frame members that allow positioning the rails in one inch increments, anywhere from front to back of the cabinet. One set of rails at front and a second set 12" back. Includes electrical panel with two resettable 15 amp circuit breakers, a hardwired trouble light and a 12 outlet plug strip mounted to the side. New Military surplus. Some slight surface rust spots.

Dimensions: 22-5/8" x 24"D x 87-1/2"H
Inside Height: 81" high
NSN: 5975-00-315-2329


30"H Harris
19" Half Rack

Harris 30"H, 19" half rack cabinet. Formica top counter. Includes 4 blank panels as shown. Used, but in excellent condition.

Dimensions: 37"H x 26"D x 23"W
Inside Height: 21-1/2" internal equipment depth, accomodates 30" total panel height

$495 each
Sold Out

19" Server Rack

(ENC) WLAVA33337-05/01
Sanmina-Sci 19" server rack. 52-1/2" equipped height. New, unused cabinets!! However, some were damaged in transit. Therefore, we offer a scratch and dent sale.

• Adjustable rails - 32" max front to back
• 4 swivel casters
• RoHS
• Ventilated at top and adjustable floor plate
• Lockable front and rear doors
• Gasketed doors
Dimensions: 24" x 38-1/2" x 58-1/2"H overall
• 34" maximum inside depth
Weight: 260 lbs


Cabinet Carcass from
WWII CG35 Modulator

Cabinet carcass from WWII CG35 modulator - rotary spark gap generator. Parts have been removed. Heave steel cabinet with 3 solid sides & front-hinged double door. Top drop-down panel. 24" x 28" x 54" high. Very heavy. New!!
Flawless Price - $695 each -$600 (3+)

Scratch & Dent - $550 each - $450 (3+)

RF Tight - Electronic
19" Shielded Rack Enclosure

(ENC) E1646-2
Western Union RF sealed steel cabinet has recessed pre-drilled rails for 19" equipment, 4" x 10" in and out ventilation honeycombs, door seal and full height latch. Solid back not removable. New, unused. NOTE: Motor freight only, 200 lbs crated weight.

Inside mounting dimensions: 26-1/4"H x 19"W x 18-3/4"D
Outside dimensions: 33"H x 25"W x 21"D

$395 each

(ENC) E1646-2/PS
Same as above but includes WU power supply. New.
$495 each

(ENC) E1646-2/U
Same as above but used, removed from service. May have electrical holes drilled. No power supply.
$225 each

19" Rack Cabinet

  • Description & Shipping Info
  • Dimensions

New factory cabinets have never had equipment mounted. Two tone brown paint, front and rear doors with magnet hold as well as lock. Vents on top and rear. All cabinets have some minor damage like doors out of alignment, scratches, etc. Motor freight averages from $75 - $150 per cabinet anywhere in the continental US.

Inside mounting dimensions: 64"H x 19"W x 15"D
(variable depth with rail adjustment).
Outside dimensions: 70"H x 21-3/4"W x 19-1/4"D

19" Rack Cabinet

(ENC) 1682661X02
  • Description
  • Dimensions

New 70" factory cabinets have never had equipment mounted. Front and rear rails for 19" equipment. Gray paint, open front and rear but posts for door.

Inside mounting dimensions: 24-3/4"H x 19-1/2"D
Outside dimensions: 70"H x 23-3/4"W x 21-1/2"D
$495 each
*** SOLD OUT ***

Equipment Rack
2-Tone Gray

(ENC) 110878
Brand new, never used (still in the factory wrapper) rack cabinet originally made for the Scientific Radio SR-110 one kilowatt Transmitter / Amplifier. 19" rack width, 43-3/4" panel height, 20-1/2" inside depth. Front and rear mounting rails. Outside dimensions: 20-1/2"W x 48"H x 22-3/8"D.

Equipment Rack
2-Tone Gray

(ENC) 150849
Brand new, never used rack cabinet originally made for the Scientific Radio SR-150 ten kilowatt Transmitter / Amplifier. 30" rack width, 68-3/4" panel height, 31-1/4" internal depth. Front & rear mounting rails. Outside dimensions: 31-1/2"W x 71"H x 33"D. Opening on left side is 16" x 24"H.
$199 each
$550 each

19" Rack Panel Adapter

(EQP) HAR916-5272
"Gates-Criterion Compact" 19" rack panel adapter. 7" high. Opening = 8-9/16"W x 5-1/8"H. Gates P/N: 916-5272-001.

19" Rack Shelf

(ENC) 014-0020-00
Conrac 19" rack shelf. Black textured finish. Offset flanges on front permit mounting of shelf in rack and separate securement of equipment on shelf. 8-1/4" high x 15" deep.
$35 each
$235 each

19" Rack Adapter

(ENC) 994-6812
Harris "Criterion Compact" 19" rack adapter. Accepts 17-1/4" x 5-1/4" equipment. Harris P/N: 994-6812-003.

Rack Chassis with
Ball Bearing Slides

21-1/2" wide rack chassis with ball bearing slides. Used, removed from Harris broadcast equipment. Includes telephone and tone pad on front panel. 21-1/2"W x 8-3/4"H x 24-1/2"D.
$75 each
$95 each

Rack Shelf with
Flip / Front Panel

(ENC) M6345
Rack shelf with flip front panel made for Gates / Harris broadcast equipment. Very cool chassis with 2 minor problems: They are new but were stored for 30 years in an unheated warehouse. The galvanized steel has corroded in places and the front panel gray paint is chipping. Both surfaces could be repainted easily. Measures 3-1/2" x 19".

19" Cabinet

Very high end rack cabinet has rails on front and rear, retractable handles, black textured finish, removable top lid panel, fold down front bail and thick rubber pad feet. Rail holes not tapped but use clips. We have only 2 in stock. New, unused. Dimensions: 7"H x 19"W x 21-5/8"D.
$75 each
$325 each

Rack Ears

(ENC) 6032040500
Pair of 14" high rack ears. Dark olive green, nearly black.

Tektronix Rack
Mounting Kit

(TEK) 016-0825-00
The Tektronix 2400 Series oscilloscopes can be mounted into a standard 19-inch equipment rack using the Rackmount Kit. 19"W x 6.6"H x 18.6"D. Comes complete with hardware, instructions and chassis slides. Brand new.
$14 each
$125 each

New Rack Panels

10-1/2" high, 1/8" thick. 19" Rack Panels

New Rack Panels

1-3/4" x 19"W. Blank gray panels. Aluminum.
$8.95 each - $7.50 (6+)

(ENC) 6605-GH
10-1/2" x 19", 1/8" thick. Blank gray hammertone steel panel. Steel. Weight: 6.55 lbs.
$12 each - $11 (6+), $10 (13+)
7" x 19"W. Blank gray hammertone aluminum panels. Aluminum. Weight: 1.60 lbs.
$16 each - $14 (6+)

Black, heavy rack panel. Aluminum. 3/16" thick. 18-3/4" x 5-1/4".
$24 each

Gray, heavy rack panel. Aluminum. 3/16" thick. 19" x 1-3/4".
$19 each

Rack Cover Panel

(ENC) 994-6892
Rack cover panel. Gates gray. 19"W x 22-1/2"H. Ventilated side panel or 19" filler. 3/64" thick steel. Harris P/N: 994-6892-001. New, unused.

Rack Cover Panel

(ENC) 994-6665
Rack cover panel. Gates gray. 19" x 19", ventilated. 3/64" thick steel. Harris P/N: 994-6665-001. New.
$40 each
$35 each