Electrical / Breaker Boxes

 

Transient Voltage Surge Suppressor
240 / 120v - Single Phase

More Images
(ELE) LW2XXC
  • Description
  • Surge Blox
  • Alarm Circuit
Transient Voltage Surge Suppressor. 240 / 120v, single-phase. Nema 4X (clear plastic hermetically sealed lid), fiberglass cabinet. A dedicated two-pole disconnect or breaker, (100 amp, 250 volt {preferred}, or 60 amp, 250 volt) is required for this suppressor (non-fused). Weight = 12 pounds. Absolutely the best surge suppressor money can buy for house or business!!


"C" Surge Blox™
It has two very high end Surge Blox 200 Suppressor Modules @ 3,000 Joules per phase. (200,000 Peak Amps, 220 Volt Clamp). The design utilizes silicon avalanche diodes (SADs) or metal oxide varistors (MOVs) in easy-to-repair and upgrade modular designs. They have a red/green self checking LED circuit and companion alarm panel with Form C contacts to activate an alarm in the event of suppression failure. AC Data Systems, manufacturer of the Surge Blox 200 states this assemblage offers redundant protection to prevent damage from repetitive voltage spikes generated by recurrent outages or by the turning on and off of other mechanical and electrical equipment as well as from oscillatory, decaying transients generated by lightning.


Alarm Circuit Assembly
Patented PC board traces are monitored by the alarm assembly to alert you of individual MOV loss and to provide reliable high-surge current capacity and low let-through voltage MOV protection. One by one, individually fused and alarmed MOVs are removed from the suppression system when degraded and damaged. The specs on the alarm circuit assembly are as follows:

Voltage: 120 vac RMS
Frequency: 50/60 Hz
Operating Temperature: -20 to 80º

 
 
$695 each - $595 (3+), $550 (12+), $495 (24+)
 

 

Schnieder Electric Disconnect Switch
250 amps / 3 Phase

Schnieder Electric Disconnect Switch
(ELE) INS-250-3P
Schnieder Electric (Merlin Gerin) 250 amps, 3 phase disconnect switch. 750v AC operating, 8kv test. 5-1/2" wide x 4" deep x 5-1/4" high. Brand new stock, over 200 available.
 
 
$179 each - $165 (6+), $150 (24+)
 

Circuit Breaker Panel
120 vac


(14) 1.5 amp Breakers
(1) 20 amp Main Breaker
(CBK) LDBWC00163A
High flyin' aircraft breaker panel in self contained, fully enclosed, 19" steel rack enclosure. Manually pull 1.5 amp MS26574-1-1/2 breakers to "off" position if necessary.

Breakers mounted to swing out front panel for easy access. 5-1/4" x 19" wide panel x 5-1/4" deep enclosure. Label bar for circuit ID. NO precut holes in back panel for total customized installations. Priced as low as $8.86 per breaker. A bargain and a half.

 

Outdoor Weather Tight Box
50 amp Dual


(ELE) RH102-4
Federal Pacific Electric (FPE) outdoor weather-tight box. 50 amps max. 120 /240 vac, 2 pole. 6" wide x 3-3/4" long x 9-1/4" high. Great for 50 amp ham shack service, outside air conditioner unit, or other heavy equipment. NSN: 5925-00-999-9319.

2nd picture is inside the box after I removed the protective steel plate that only the toggle protrudes from.

$125 each - $109 (3+)
 
$20 each - $18 (2+), $15 (12+), $12 (50+)

3 Pole Circuit Breaker
250 vac / 50 amp

(CBK) 3363G1-50A
Heinemann circuit breaker. 3 pole. 250 vac, 50 amp, 50/60 Hz. Includes enclosure. 5-1/2" x 8-1/2" x 3-1/2" high.
 

Wiremold ®
AC Switch

(ELE) 2140
Wiremold ® AC switch. Single pole.
$149 each
 
$5 each

Electrical Switch Box
15 amp / 120 - 277 vac

(ELE) 2102
Pauluhn Electric Mfg. Co. electrical switch. 15 amp, 120 - 277 vac switch. Heavy brass switch box. Weather proof gasket. No holes drilled. 3-1/8" x 4-1/4" x 3-3/4" overall. 2" deep cavity. 4.6 lbs. NSN: 5930-01-177-5202.
 

"Knife Switch" Safety Switch
30 amp / 250v

(ELE) CSZ-24315
Square D Company "Knife Switch" safety switch. 250v, 30 amp. Heavy steel box. Use "FRN" size fuses. 6" x 7-5/8" x 13" high. Made for the Radio Room of the 1950's.
$119 each
 
$19.95 each

 

Explosion Proof Enclosure
"Condulet"

(ENC) RSM-1
Crouse Hinds explosion proof enclosure. "Condulet". Four 1/2" ports, Two 3/4" ports (ends). 9-1/2" x 5-1/2" x 4-1/2" high.
 
 
$150 each
 

Switch Box
30 amp

(ELE) GFN221
Westinghouse disconnect box couldn't be any higher quality. 30 amp fused. Interlocking switch only allows door to open when off. Requires two fuses. UL Listed. 6-1/2" x 7-7/8" x 4" high. Accepts FRN style fuses. 2" x 9/16".
 

Electric Meter Socket

(SOK) 893A293AB
Electric meter socket. Helical with torsion. 7-1/2" diameter base. NSN: 5977-00-444-7608.
$15 each - $12 (2+), $10 (12+), $8 (50+)
 
$10 each

Repeater Panel

(EQP) 643544
Package Machinery Co. repeater panel. 2 circuits - each with a 2 pole tap switch and an Edison fuse socket. Tap switch rotates CW or CCW and passes between ON-OFF-ON-OFF. Black finish on wood front panel. Hinge and angle bracket mount (see close-up pics). 15-1/2" x 4" high x 5-1/2" deep. Used, recycled. Made in 1940s. This is a cool, vintage control panel for your antique restoration. Great for control panel for Tesla circuit.
 

3/4" Right Angle Box

(ELE) GRL-75-3/4
Appleton Electric 3/4" right-angle box. GRHC series. Explosion proof, galvanized. Removable screw top lid. 3-1/2" diameter x 3" high. 3/4" outlets, 2 each @ 90º. Cover opening measures 3-3/8" diameter. NSN: 5975-00-106-1520.
$35 each
 
$49 each

Ivory UTPI Duplex
Outlet Cover

(ELE) UTPI
Jerrold standard size ivory UTPI duplex outlet cover. 2-3/4" x 4-1/2". Made in USA.
 

4" Square
1/2" Raised Box Cover

(ELE) 8371
Appleton dual duplex raised outlet cover allows extra space underneath.
25¢ each - $5 for box of 25 (Only 20¢)
 
$1.50 each

Square D
45º Elbow

(ELE) LD-645L
Square D 6" x 6", 45º elbow. Combination hinge and screw cover.
 

Square D
90º Elbow

(ELE) LD-690L
Square D 6" x 6", 90º elbow. Combination hinge and screw cover.
$10 each
 
$10 each - $9 (3+)

Wiremold Combination
Internal / External Elbow

(ELE) G6017TX
Wiremold combination internal / external elbow. Gray. 3.562" square. For use as internal elbow, external elbow, inverted elbow, tee fitting or cross fitting.
 

6" x 8" Box

(ELE) EB-6X8
Very basic electrical box. Empty, 6-1/4" x 8-1/4" x 4" high. 12 knock-outs.
$10 each
 
*** SOLD OUT ***
 

Hammertone Gray
2 x 4 Blank Box Cover

(ELE) 319777000
New box covers finished in two tone gray hammertone.
 

Wiremold Conduit Box

(ELE) G2110A
Four 1/2" knock-outs. Front cover removable. Mates with wiremold strip. 1-5/16" x 1-1/2" x 2-1/4". Gray.
$2 each
 
$1 each - 75¢ (10+)

Reducer Duct

(ELE) LD64R
Square D wireway reducer, 6" to 4". 6" x 6" x 3-1/4"D.
 

Switch Box
4300 Series

(ELE) 20-9374-HF
Allied 4 gang nail or screw on switch box. Older style of 4300 series.
$19.95 each - $18.95 (25+)
 
$5 each - $4.50 (10+), $4 (25+)