Low Profile
Medium Bi-Pin Fluorescent Quickwire Lampholders - 660 Series
These lampholders, molded
in white thermosetting urea, feature quickwire pressure terminals with recessed wire sells
to insulate against shorting. High-strength brass alloy quickwire contacts accept No. 18
ga. solid topcoat or twisted and tinned stranded leads. The multiple terminal slots permit
a double contact connection at each contact point allowing a jumper connector for rapid
start circuits. The 660 Series lampholders are designed for T8 or T12 fluorescent lamps.
Low Profile Fluorescent
Quickwire Lampholder
(LMP) 660A Low profile fluorescent quickwire lampholder. Two 20 ga.
slots. 1-21/32"H x 11/32" thick. Lampholders are suitable for use in fixtures designated
for damp or wet
locations. Made by
Triboro.
CSA
- UL Listed.
NOTE: 1,000 pcs = 1 case.
Low Profile Fluorescent
Quickwire Lampholder
(LMP) 660A-17SH Low profile fluorescent quickwire lampholder with internal
shunt. One 20 ga. slot. 1-21/32"H x 11/32" thick. Lampholders are suitable
for use in fixtures designated for damp or wet locations. Made by Triboro. CSA -
UL Listed.
$1 each - 75¢ (10+),
50¢ (50+), 25¢ (1,000+)
(case)
