Electrical
Home Page Electrical Resistors & Fuseholders Fuse Holders: Panel Mount
 
Fuse Holders: Panel Mount

Fuseholder Kit
Assembled N2 - 2 amp fuse
(FUH) HN1.75-2.5K
Bussman fuseholder kit. Holder accepts only flanged fuses in the range of 1-3/4 amp to 2-1/2 amp. 0.463"D hole with side notch. Push & twist fuse. HN, 250v, 1-3/4 - 2-1/2. Kit includes holder and one N2 - 2 amp fuse.
 

Fuseholder Kit
Assembled N1.25 - 1-1/4 amp fuse
(FUH) HN.75-1.25K
Fusetron fuseholder kit same as HN1.75-2.5K (left) except accepts flanged fuses in the range of 0.75 amp to 1.25 amp. 0.463"D hole with side notch. Push & twist fuse. HN, 250v, 3/4 - 1-1/4. Kit includes holder and three N1.25 - 1-1/4 amp fuses.
$1.50 - $1.35 (10+), $1.20 (50+), $1 (250+), 85¢ (1k+)
 
$2 each - $1.75 (25+)

Fuseholder Kit
Assembled N1-3/4 - 1.75 amp fuse
(FUH) HN1.3-1.75K
Fusetron fuseholder kit same as HN1.75-2.5K (above) except accepts flanged fuses in the range of 1.3 amp to 1.75 amp. 0.463"D hole with side notch. Push & twist fuse. HN, 250v, 1-3/10 - 1-3/4. Kit includes holder and one N1-3/4 - 1.75 amp fuse.
 

Panel Mount Fuseholder
for Standard 3AG / AGC Fuses
(FUH) FH50
Panel mount fuseholder for standard 3AG / AGC fuses. Screw cap. Requires 9/16" hole.
$2 each - $1.75 (25+)
 
$2.65 each - $2.30 (10+)

Flange Mount Fuseholder
30 amp / 600v
(FUH) 571007
Littelfuse flange mount fuseholder. 30 amp, 600v. Flange mounts in 0.865" hole. Uses midget cartridge fuse like (FUH) BLF20.
 

Panel Mount Fuseholder
3AG / AGC 250v - 10 amp
(FUH) 345
Littelfuse 345 series panel mount fuseholder. 3AG / AGC 250v, 10 amp fuse capacity. With buss 4/10 fuse. Requires 1/2"D hole, 1-3/8" behind panel depth, 0.587" diameter bezel. Removed from new equipment.
$5 each
 
$1.50 each - $1.25 (10+)

Indicating Fuseholder
20 amp / 90 - 250 vac
(FUH) FHL17G1
Buss indicating fuseholder. Lights when fuse blows. 20 amp, 90 - 250 vac. Includes 20 amp, F03A fuse. Fits 0.62" hole. Removed from new equipment.
 

Navy Panel Mount Fuseholder
30 amp / 250v Max
(FUH) FHN/U
FHN navy panel mount fuseholder. 30 amp / 250v max. 3 AG / AGC style. Used, removed from new equipment.
$7.95 each
 
$9 each

3AG Fuseholder
Up to 10 amps / 250 vac
(FUH) SQ
3AG fuseholder. Up to 10 amp, 250 vac. Panel mount. Bezel measures: 0.661" x 0.661". Requires 9/16" hole. 1-3/4" behind panel depth. Labeled "FUSE". Solder terminals.
 

3AG Style Fuseholder
15 amp / 250v
(FUH) 345101A
Littelfuse 3AG style fuseholder for circuit board applications. 15 amp, 250v. 1/2" square x 1-3/4"L.
$3 each
 
$1.50 each - $1.25 (10+)

Bussman HPG 30 amp Panel
Mount Fuseholder
(FUH) HPG
Bussman HPG 30 amp panel mount fuseholder. 600v. Requires 7/8" diameter hole. Accepts AGU, BAF, BAN, DCM, FNA, FNM, FNQ, KLM, KTK, KTQ, LP-CC, MIC & MIN series fuses.
 

Panel Fuseholder
(FUH) 18AWE
Panel fuseholder. Uses odd 1/4" x 1-1/2" long fuse. 3/4" long wire wrap terminals on rear. 15/16" x 13/16" square flange. 2-1/2" behind panel depth.
$11 each - $10 (3+)
 
$3 each - $2.50 (10+)

Standard Panel Fuse Holder
Up to 20 amps
(FUH) FHN20G
Mil-spec gray, standard panel mount fuseholder. Up to 20 amp 3AG fuse. 1/2" hole.
 

Panel Mount Fuseholder
(FUH) 3455LS-1
Littelfuse panel mount fuseholder. Fuse - 5mm x 20mm. Mates with 120-28177.
$4 each - $3 (5+)
 
$2.75 each - $2 (10+)