|
|
|
|
|
Ferrite Toroid
16mm (0.630") Inner Diameter
26mm (1.024" Outside Dia -
15mm (0.591") Long |
 |
(ICH) SB-5S-26X15
Samwha P/N: SB-5S-OR26X15X16H. Great for EMI
/ RFI suppression of cables up to 5/8" diameter.
Low frequency mix is ideal for use DC-4 KHz. Stack two or more
for desired attenuation effect. |
|
|
Ferrite Toroid
17.9mm (0.705") Inner
Diameter
39.25mm (1.545" O.D. -
13.09mm (0.515") Long |
|
(ICH) FT43813-OW
Magnetics P/N: FT43813-OW. "W" material
has extremely high permeability of 10,000. Bare finish, 51.7
grams, Al = 16,700 mH per 1000 turns, Ie= 8.3 cm, Ae = 1.15 cm2,
Ve = 9.55 cm3, Window Area = 2.85 cm2. |
|
| $1 ea -
75¢ (6+), 65¢ (25+),
55¢ (100+), 49¢ (250+) |
|
|
|
| $2 each
- $1.50 (6-24), $1.25 (25-99),
$1 (100+) |
|
|
|
|
|
Ferrite Toroid
32.3mm (1.272") Inner Diameter
50.6mm (1.992") O.D. -
16.85mm (0.663") Long |
 |
(ICH) FT44916-ZW
Magnetics P/N: FT44916-ZW. "W" material
has extremely high permeability of 10,000. Gray painted finish,
75.3 grams, Al = 11,800 mH per 1000 turns, Le= 12.7 cm, Ae =
1.16 cm2, Ve = 14.8 cm3, Window Area = 8.99 cm2. |
|
|
Ferrite Toroid
TVI Elimination
|
 |
(ICH) FT-240-43
2.4" outside diameter, 1.4" inside, 1/2" wide.
Material 43 is usable from DC-200 MHz, is most often found in 1-30 MHz circuits with
best Q
range from DC-5 MHz. Z=58 ohms @ 25 MHz, 108 ohms @ 100 MHz. To use as TVI filter,
pass AC line cord, coax, data cable or speaker wire through toroid as many passes
as possible. The more, the better. We have one on the network cable at each workstation
throughout our entire warehouse. Surges from nearby lightning hits were taking
out the network cards. I haven't lost one since the "roids". |
|
| $4.50 ea
- $3.90 (6-24), $3.50 (25-99),
$3 (100+) |
|
|
|
| $14 each
- $12 (2-19), $10 (20+) |
|
|
|
|
|
Ferrite Toroid |
 |
(ICH) FT-287-61
2-7/8" outer diameter, 1-9/16" inside, 1/4" thick.
Material 61
has resistivity and is usable from 0.2 - 10 MHz. |
|
|
Ferrite Toroids
7/8" - 10 Hz - 1 KHz |
 |
(ICH) FT87-75
Ferroxcube 846T250-3E2A, un-painted. We
have found the best core, with low loss and high permiability
for pulse, linear and broadband transformers and power
supplies. EMI 50/60/400 Hz filters and more. Material
75: Perm.= 4700,
7000 max and has 5 by 10 (-6) loss factor @ 100 Kc. I.D.
= 0.555", 0.25" high. Two models: epoxy painted
green and unpainted, same price. |
|
|
|
| $1 each - 85¢ (10-24),
75¢ (25-249), 65¢ (250+) |
|
|
|
|
|
Ferrite Toroid Core |
 |
|
(ICH) YF40601-TC
Magnetics ferrite toroid core. "F" material. AL = 585. 0.229"
(5.84mm) O.D. x 0.120" (3.05mm) I.D. x 0.059" (1.52mm). Same as Philips 1041CT60/3B7. |
|
|
Ferrite Toroid Core |
 |
|
(ICH) YJ41003TC
Magnetics ferrite toroid core. "J" material.
AL = 2196. 3/8" (9.53mm) O.D. x 3/16" (4.75mm) I.D. x 3/32" (3.18mm). |
|
| 35¢ each - 29¢ (100+),
23¢ (1000+), 19¢ (10K+) |
|
|
|
| 40¢ ea - 35¢ (25+), 30¢ (100+), 22¢ (1k+), 18¢ (5k+) |
|
|
|
|
|
Ferrite Toroid Core |
 |
|
(ICH) ZW41506TC
Magnetics ferrite toroid core. AL = 4590.
Coated -200ºC. 0.5" (13.2mm) O.D. x 0.25" (7.3mm) I.D. x 0.125" (3.9mm). |
|
|
Ferrite Toroid Core |
 |
|
(ICH) ZJ41605TC
Magnetics ferrite toroid core. "J" material.
AL = 2760. Nylon, 1kv coating, 5000µ. 5/8" (16.1mm) O.D. x 5/16" (7.6mm) I.D. x 3/16"
(4.9mm). |
|
| 50¢ each - 42¢ (25+),
35¢ (100+), 30¢ (1000+) |
|
|
|
| 50¢ each - 40¢ (25+),
35¢ (100+) |
|
|
|
|
|
Ferrite Toroid Core |
 |
|
(ICH) ZJ42212TC
Magnetics ferrite toroid core. Init. permeability
= 5000, HV nylon coating (71,000v), AL = 6040 nH. PWM power supply. 7/8" (22.86mm)
O.D. x 19/32" (13.34mm) I.D. x 1/2" (12.95mm). |
|
|
Ferrite Toroid Core
High Flux
|
 |
|
(ICH) 58548A2-2
Magnetics ferrite toroid core, high flux mpp
cored. Permeability = 125, AL = 127. 1.3" (33mm) O.D. x 0.785" (19.9mm) x 0.42" (10.7mm). |
|
| $1.50 each - $1.25 (10+), $1 (100+) |
|
|
|
| $2.75 ea - $2.50 (25+),
$2.25 (100+), $1.95 (1K+) |
|
|
|
|
|
Ferrite Toroid Core |
 |
|
(ICH) TC5.8/3.1/1.5-3B7
Ferroxcube ferrite toroid core. Init. perm.
= 2300µ, Mix = 3B7, AL = 450 nH. 7/32" (5.8mm) O.D. x 3/32" (3.1mm) I.D. x 3/64" (1.5mm).
Same as Magnetics YG40601TC. |
|
|
Ferrite Toroid Core |
 |
| |
(ICH) F8BT19X10X10B
Ferrico ferrite toroid core. F8B material.
Init. perm. = 50µ, 1000 vac, blue coating, 300 - 900 MHz. 3/4" (19mm) O.D. x 3/8" (10mm)
I.D. x 3/8" (10mm). |
|
| |
|
| $1.50 each - $1 (25+), 75¢ (100+),
50¢ (1K+) |
|
|
|
|
|
Ferrite Toroid Core |
 |
| |
(ICH) 5975007621
Fair-Rite ferrite toroid core. Init. perm.
= 5000µ, 75 mix epoxy coated. 7/8" O.D. x 17/32" I.D. x 1/2". Common mode and pulse
applications. |
|
|
Ferrite Toroid Core |
 |
|
(ICH) 5943001001
Fair-Rite ferrite toroid core. Init. perm.
= 850µ, AL = 510, 43 material. 1.142" (29mm) O.D. x 0.748" (19mm) I.D. x 0.295"
(7.5mm) height. |
|
| $1.50-$1.35(10+), $1.20(25+),
$1(250+), 75¢(2.5K+) |
|
|
|
| $2.50 each - $2.25 (25+),
$2 (100+),
$1.75 (250+) |
|
|
|
|
|
|
Ferrite Toroid Core
High Flux
|
 |
(ICH) CH203125
CWS ferrite toroid core. High flux. Init.
perm. = 125µ, epoxy coated. 0.80" O.D. x 0.5" I.D. x 0.25" height. |
|
|
| |
| $1.25 each - $1.09 (25+),
95¢ (100+),
75¢ (1K+) |
|
|
|
|
|
|
Ferrite Toroid Core |
 |
(ICH) MA100R-22/14/13C-E
Kawatetsu ferrite toroid core. 1500v, 200ºC,
epoxy coating, AL = 12080. 7/8" (22.1mm) O.D. x 17/32" (13.7mm) I.D. x 17/32" (12.7mm)
height. Same as Magnetics ZW42212TC. |
|
|
Giant Ferrite Toroid |
 |
(ICH) FT575-43
Giant ferrite toroid. 5-3/4" outside diameter, 2-7/16" inner
diameter, 19/32" thick. Perfect for many purposes including: RFI, antenna balun,
antenna transformer. |
|
| $2.50 each - $2 (10+), $1.75 (100+) |
|
|
|
|
|
|
|
High Voltage Nylon Coated
Ferrite Toroid - 155ºC |
 |
|
|
(ICH) ZJ41610TC
Magnetics high voltage,
nylon coated ferrite toroid. J material. 155ºC. Equivalent to Ferrite International
P/N: 5000-16-09-10-0002. NOTE:
1 case = 4,969 pcs.
• AL = 5410
• Ni = 5000
• Dimensions: 16.47mm (0.648") O.D. x 9.84mm (0.387") high, 8.38mm (0.330") I.D.
|
|
|
Ferrite Toroid |
 |
| |
(ICH) T231212T
Ceramic Magnetics ferrite
toroid has a co-efficient of thermal expansion = 11.5 x 10-6 /ºC.
MN60 material, Mn-Zn ferrite. Max flux density is 4500 gauss. µ=5000
/ 6500.
24,000 available!!
• Dimensions: 0.12" I.D. x
0.12" H x
0.24" O.D.
|
|
| 50¢ ea - 40¢ (100+),
32¢ (1,000+), 20¢ (4,969+)(case) |
| |
|
|
| 25¢ each - 20¢ (100-999),
15¢ (1,000+) |
| |
|
|
|
|
Strip Wound Toroid |
 |
|
(ICH) 52425-1A
Magnetics strip wound toroid. Orange. 2.0" (50.8mm) outside diameter, 1.25" (31.8mm) inner diameter, 0.375" (9.5mm) high. A Material, Square Orthonol, 1 gauge (.001”) thick. 52 Core is in aluminum case with epoxy coating. |
|
|
Strip Wound Toroid |
 |
|
(ICH) 52356-1/2A
Magnetics strip wound toroid. Orange. 0.75" (19mm) outside diameter, 0.687" (17mm) inner diameter, 0.125" (3.2mm) high. A Material, Square Orthonol, 2 gauge (0.002”) thick. 52 Core is in aluminum case with epoxy coating. |
|
| |
|
| $1.20 - 90¢ (10+), 75¢ (50+), 60¢ (100+), 44¢ (250+) |
|
|
|
|
Strip Wound Toroid |
 |
|
(ICH) 50B12-1D
Magnetics strip wound toroid. Orange. Square, permalloy 80, Material D. Non-metallic, nylon 200ºC core. Measures 0.560" (14.24mm) O.D. x 0.318" (8.08mm) I.D. x 0.185" (4.70mm) high. |
|
|
Ferrite Toroid |
 |
|
(ICH) 55110-A2-2
Magnetics ferrite toroid. 60µ permeability. AL=80. MMP material, A2 coating. Nominal DC Res. = 0.0274 ohms. 2.25" (57.2mm) O.D. x 1.4" (35.6mm) I.D. x 0.55" (14mm) high. |
|
| $1 - 75¢ (10+), 60¢ (50+), 50¢ (100+), 35¢ (500+) |
|
|
|
|
|
|
Ferrite Toroid |
 |
(ICH) A715152-9
Arnold ferrite toroid. 2" outside diameter,
1.25" inner diameter, 0.53" high. |
|
|
Ferrite Toroid |
 |
(ICH) A-263104-2-IG
Arnold ferrite toroid. 173 permeability,
AL = 104, MPP material. 0.655" outside diameter, 0.400" inner diameter, 0.250" high. |
|
| $5 each - $4.25 (10+), $3.75 (25+) |
|
|
|
| $1.25 each - $1 (25+),
80¢ (100+) |
|
|
|
|
Ferrite Toroid |
 |
| |
(ICH) A-175217-2
Arnold ferrite toroid. 173 permeability, AL
= 217, MPP material. 1.060" outside diameter, 0.58" inner diameter, 0.44" high. |
|
|
Ferrite Toroid |
 |
|
(ICH) ZJ43615TC
Magnetics ferrite toroid. 'J' material. AL = 6736 nH, Ui perm = 5000. Epoxy coated. 36mm (1.43") O.D., 23mm (0.90") I.D., 14.6mm (0.574") high. |
|
$2 each - $1.75 (25+),
$1.50 (100+) |
|
|
|
$3 each - $2.50 (25+), $2.15 (100+),
$1.90 (250+), $1.50 (1,000+) |
| |
|
|
|
|
EMI / RFI Toroids |
 |
(ICH) MS130060-2
Arnold EMI / RFI toroid. 60 ui perm., AL = 61. 1.3" (33mm) O.D. x 0.785" (19.94mm) I.D. x 0.42" (10.67mm) high. Super MSS material (similar to Sendust). Equivalent to CSC P/N: CS330-060 or Magnetics P/N: 77071-A2. Very popular EMI / RFI toroid for filter winding. |
| $1.25 each - $1.15 (10+), $1.05 (100+), 95¢ (500+) |
|
|
(ICH) CS330-060
CSC EMI / RFI toroid. Same as (ICH) MS130060-2 above. Material = Sendust. |
|
|
Ferrite Toroid Core |
 |
(ICH) ZP41407-TC
Magnetics ferrite toroid core. Epoxy coating. AL = 1356. P material. 17/32" (13.34mm) O.D. x 1/4" (6.5mm) I.D. x 7/32" (5.29mm). |
|
| $1.25 each - $1.15 (10+), $1.05 (100+), 95¢ (500+) |
|
|
|
| 50¢ each - 40¢ (100+), 32¢ (1,000+) |
|
|
|
|
| |
The Perfect Toroid Wire
Teflon - 14 AWG |
 |
(WTF) 21401AUL6-0A
Perfect toroid wire!! Teflon, 14 AWG, black solid tinned. 200ºC,
600v. Mfg: Dearborn. |
|
|
| |
| 65¢ per foot - 52¢ (100-999
ft) |
|
|
|
|
|
|
|
|
|
|
| |
Ferrite Toroids |
 |
| All Toroids listed below in chart
are made by Magnetics. |
|
|
| Part Number |
O.D. |
I.D. |
Thick |
Inductance |
Notes |
Price |
(10+) |
(25+) |
(250+) |
|
| (ICH) 77310-A7 |
0.91" |
0.543" |
0.308" |
90 mH / 1000 turns |
125 permeability
Arnold P/N: MS-090125
|
0.75 |
0.65 |
0.50 |
0.43 |
|
| (ICH) 77312-A7 |
0.91" |
0.54" |
0.308" |
19 mH / 1000 turns |
Arnold P/N: MS-090026-2
Sendust P/N: S090-019A |
0.85 |
0.75 |
0.65 |
0.52 |
|
| (ICH) 77932-A7 |
1.072" |
0.575" |
0.442" |
32 mH / 1000 turns |
Arnold P/N: MS-106026-2
Sendust P/N: S106-032A |
2.50 |
2.00 |
- |
- |
|
| (ICH) 77930-A7 |
1.090" |
0.555" |
0.470: |
See PDF file |
Magnetics Kool MU, PDF
125 permeability,
AL=57 |
2.25 |
2.00 |
1.75 |
1.35 |
|
| (ICH) 77550-A7 |
1.310" |
0.780" |
0.422" |
28 mH / 1000 turns |
Arnold P/N: MS-130026-2
Sendust P/N: S130-028A |
3.00 |
- |
- |
- |
|
|
|
|
|
| |
Toroids |
 |
| An assortment of orphaned toroids
and regular stock items, both ferrite and powdered iron. We have some real nice pieces here. |
|
|
NOTE: Minimum order is $1.00 per line item |
| Part Number |
O.D. |
I.D. |
Thick |
Mix |
Metal |
Al |
Perm. |
Price |
$ (10+) |
$ (25+) |
|
| (ICH) FT23B-43 |
0.230 |
0.115 |
0.125 |
43 |
Ferrite |
- |
- |
0.50 |
0.45 |
0.40 |
|
| (ICH) FT-25-WH |
0.250 |
0.120 |
0.125 |
white |
Ferrite |
- |
- |
0.30 |
0.25 |
0.20 |
|
| (ICH) FT-27-OR |
0.275 |
0.150 |
0.135 |
orange |
Ferrite |
- |
- |
0.40 |
0.35 |
0.30 |
|
| (ICH) 55027-A2-4 |
0.320 |
0.156 |
0.130 |
A2 |
Iron |
- |
- |
0.30 |
0.25 |
0.20 |
|
| (ICH) 649E55031 |
0.335 |
0.135 |
0.125 |
molydm |
Ferrite |
- |
- |
0.30 |
0.25 |
0.20 |
|
| (ICH) 8051200MA |
0.335 |
0.225 |
0.100 |
orange |
Ferrite |
- |
- |
0.30 |
0.25 |
0.20 |
|
| (ICH) YR41003TC |
0.375 |
0.030 |
0.122 |
R |
Ferrite |
1000 |
2300µ |
0.50 |
0.45 |
0.40 |
|
| (ICH) FT37-61 |
0.375 |
0.225 |
0.100 |
orange |
Ferrite |
- |
- |
0.30 |
0.25 |
0.20 |
|
| (ICH) T37-41 |
0.435 |
0.240 |
0.185 |
audio |
Ferrite |
- |
- |
0.50 |
0.45 |
0.40 |
|
| (ICH) TX13/7.1/4.8-3C81 |
0.500 |
0.250 |
0.1875 |
3C81 |
Ferrite |
1475 |
2500µ |
0.75 |
0.50 |
0.40 |
|
| (ICH) 57-3531 |
0.500 |
0.310 |
0.250 |
43 |
Ferrite |
- |
- |
1.00 |
0.85 |
0.75 |
|
| (ICH) 287N55050 |
0.525 |
0.290 |
0.200 |
A2 |
Iron |
- |
- |
0.50 |
0.45 |
0.40 |
|
| (ICH) FT55-75 |
0.555 |
0.260 |
0.205 |
75 |
Ferrite |
- |
- |
- |
- |
SOLD |
OUT |
| (ICH) 2643625002 |
0.625 |
0.562 |
0.312 |
- |
Ferrite |
- |
- |
0.50 |
0.45 |
0.39 |
|
| (ICH) 873-55118 |
0.665 |
0.385 |
0.260 |
A2 |
Iron |
- |
- |
0.50 |
0.45 |
0.40 |
|
| (ICH) 330D55118 |
0.665 |
0.385 |
0.260 |
A2 |
Iron |
- |
- |
0.50 |
0.45 |
0.40 |
|
| (ICH) FT79-GR |
0.790 |
0.485 |
0.250 |
green |
Ferrite |
- |
- |
1.00 |
0.85 |
0.70 |
|
| (ICH) 2882153 |
0.790 |
0.500 |
0.375 |
purple |
Ferrite |
- |
- |
1.00 |
0.85 |
0.70 |
| | | |
