Meters: DC Volts to 49 vdc
DC Polarity Indicator
Rear / Side View No Input Negative Input
(MTR) PC119
Emico DC polarity indicator. Flag indicator is fluorescent red and swings to positive or negative depending on polarity of input. Type PC119 with bezel. 7/8"D x 1". Requires 0.5 vdc to indicate. Includes mounting bezel (Picture) with screws.
NSN: 6685-00-962-2717.
$20 each
Meter - 0 - 150 Scale
30 mvdc
(MTR) 42646
Simpson "Percent Motor Load Current" meter. FS = 30 mvdc. 0 - 150 scale. 3" square face. Requires 2-5/8" mounting hole. 2" behind panel depth.
$29 each
Milli Volt Meter
0 - 100mv DC
(MTR) 91147-190
International Instruments edgewise meter. Ruggedized moving coil, internal lamp. 3-3/8" wide x 1-7/16" high face. 2-3/4" behind mounting ears. NSN: 6625-01-019-5496.
$99 each
Meter
50 - 0 - 50 mvdc
(MTR) 7031
Simpson Model 1329 meter. 50 - 0 - 50 mvdc. 4" x 5" face. Requires 2-3/4" mounting hole. 1-3/4" behind panel depth.
$75 each
Meter
0 - 5 vdc
(MTR) 1327-5VDC
Simpson panel meter. 0 - 5 vdc. Model 1327, Cat # 9720. 1k ohms / volts. Wide VUE annular. 3-1/4" x 3-1/4", 2-1/8" behind panel depth.
$85 each
Meter Relay
0 - 10 vdc
(MTR) 26-3001-2001
API Display & Control Inst. panel meter relay. 0 - 10 vdc, DC volts. Adjustable high limit set point. 2-1/2" x 2-5/8" x 1-7/8" deep. 1-3/4" x 1-3/4" c-c mounting studs. Requires 2-1/4" diameter hole.
$125 each
Meter
0 - 10 / 0 - 20 Volts DC
(MTR) 1751-69
Weston 1 mADC full scale. 4-3/16" x 4-5/8" face. 2-3/4" hole required. 1-3/4" behind panel clearance.
$22 each - $18 (3+)
Voltage Indicator
1 - 28 vdc
(MTR) 5AD0300044
High visibility edgewise indicator flips to International Orange if any DC voltage is present. 1/2 scale reading about 30 mv. Full scale = 80 mv. 1-11/16" wide hole to hole for mounting. 2" x 13/16" max. body. 5/8" x 1-3/16" feedthru face. 1/2" depth behind 3/32" thick flange. NSN: 6625-00-024-2406.
$19 each
Meter
16 - 32 vdc
(MTR) 665127
Expanded voltmeter is centered on 24 vdc. Actual minimum: 16 vdc, maximum 32 vdc. Draws 10 mA. Accuracy is ±10%. 2-1/4" square, 2" mounting hole. With bracket.
**SPECIAL PRICE** $12 each - $9 (10+)
Meter
16 - 32 vdc
(MTR) 302-0611
General Electric expanded voltmeter. 16 - 32 vdc scale. Actual minimum: 16 vdc, maximum: 32 vdc. 3-1/2" square, 2-3/4" mounting hole.
$35 each

Meter
24 - 32 vdc

(MTR) 320-08740
Expanded Phaostron sealed voltmeter is centered on 28 vdc. Actual minimum reading: 24 vdc. Actual full scale: 32 vdc. 3-1/4" high x 3-3/4" wide. 1-1/2" behind panel.
$45 each
Meter
24 - 32 vdc
(MTR) 16410
Expanded Simpson shielded voltmeter is centered on 28 vdc. Full scale = 11.2v. 4-1/8" high x 4-1/2" wide. 2-3/4" mounting hole. 1-7/8" behind panel. NSN: 6625-00-495-2674.
$85 each

Percentage Power

(MTR) E09-2
Blue M volt meter has blue/orange/red graduated scale. Full scale 40 volts DC. Includes 8k, 10w resistor.
*** SOLD OUT ***
Weston Lab Meter / DC Volts
0 - 7.5v / 0 - 30v / 0 - 75v
(MTR) 931-75VDC
Weston lab meter, DC volts. 0 - 7.5 - 30 - 75 vdc scale. Separate input terminals. Leather handle. Black bakelite case. 0 - 7.5v, 0 - 30v, 0 - 75v. 5" x 3-1/4" x 5-1/4"H.
$145 each
Weston Lab Meter / DC Volts
0 - 3.0v / 0 - 15v / 0 - 150v
(MTR) 931-150VDC
Weston lab meter, DC volts. 0 - 3 - 15 - 150 vdc scale. Separate input terminals. Leather handle. Black bakelite case. 0 - 3.0v, 0 - 15v, 0 - 150v. 5" x 3-1/4" x 5-1/4"H. Only one available.
$175 each