Gear Motors

(MOT) M1145055.00

Leeson AC gear motor. Thermal protected. 230v / 480v @ 0.7 amps / 0.35 amps, 3 phase, 0.167 HP, 60 Hz, continuous duty, 40 amb, 20 in. lb. torq, 480 rpm, 7:1 ratio. 10" overall length. 4" x 4-3/4" mounting face. 5/8"D x 1-1/2"L round shaft with key. Alt. P/N: CM38T35NZ2A.

$435 each

Enlarge Image

(MOT) HLI2660-R2.4-GP56.3

Mettler-Toledo gear motor. 24 vdc. 4:1 ratio. 3000 rpm max. 2-1/8"D x 4"L body, 8-3/4" overall length. 0.591"D x 1.18"L round shaft, keyed, threaded center bore. Alt. P/N: 24124602.

$175 each

Click here for PDF file

Enlarge Image

(MOT) ECI-42.40B00

EBMPapst gear motor. 5 pin power receptacle. 24 vdc nominal (18 - 28 vdc) @ 3 amps, 52 watts. 100 mNm, 5000-1 min. 1-5/8" diameter x 5-9/16" long. 0.314" diameter x 0.892" round shaft with key. Alt. P/N: 932-4240-610.

$95 each

Click here for PDF file

More Images

(MOT) 150-1353

AutoTrol gear motor. 1 rpm, CCW when facing shaft, 115 vac, 60 Hz, 4 watt, 45 ma. Permanent magnet. Running torque = 125 oz. in., Starting torque = 87 oz. in. 10-32 threaded shaft. 1.95" x 2.53" x 0.905" thick. 1.87" c-c mounting holes, 0.43" diameter.>

$18 each - $16.50 (6+), $15 (25+)

More Images

(MOT) B00005ASY

Gear motor assembly. 24 vac, reversible. This assembly has been removed from factory new, never used equipment. Includes sub-chassis, 1k - 10 turn positioning pot, capacitor and resistor. Many uses such as advancing rotary switches, variable inductor drives, etc. 3-1/2" x 4-1/4" x 4"H.

$85 each

(IRV) B00003

Mounted in a 4-1/4" x 3-1/2" x 5"H aluminum frame with mounting tabs. Motor measures: 2-5/8" x 3-1/4" x 4". 1/4"D shaft.

$59 each

(MOT) B00005

24 vac (50/60 Hz) operated motor is used in the SRS Antenna Couplers to tune inductors, switches and vacuum caps. Healthy torque manages any component in their line. 70 rpm at 24 vac 60 Hz, with full rated load. Lower voltage to lower speed also decreases torque. Double 1/4" shaft exits each side of gearbox. Mounts by threaded post sockets on front spaced in a 1-9/16" square. Max dimensions 3-3/4" high x 2-7/8" wide x 3-1/2" deep from mounting posts to electrical terminals on back.

Suitable for almost any remote tuning application of a vacuum cap, rotary inductor or ceramic switch.

MK Model QFS3420R. Includes starting cap and wiring instructions. Limited quantity!

$79 each

Enlarge Image

(MOT) 712750-1

TRW Globe gear motor # 5A1951. 26.5 vdc. 2.7 rotation turns counter and stop. DC inputs include RFI filters. 2-1/2" diameter, 140 tooth gear. NSN: 6105-00-860-6067.

$150 each

Enlarge Image

(MOT) PM1-60-30

Groschopp parallel shaft gear drive has 30 rpm output at rated torque of 800 Ncm = Md. 12 vdc @ 2.3 amps, 17 watt, 2000 rpm German made motor with brushes. Calypsol gear head model SG80. 1/2" shaft is 1-1/4" long. Overall body length 7" not including shaft. 2-3/4" x 3" wide. Limited quantity at this low price!

$117 each - $105 (3+)

(MOT) MP4851-0-0-1

Barber-Coleman motorized actuator, damper motor. 240v, 60 Hz, 0.22 amps, 28 watts. 1/2" spline shaft. 5-1/4" x 5-1/2" x 7"H. New, unused. Harris P/N: 442-0044-000.

$199 each

Click here for Wiring Diagram

(MOT) SP547

Hurst motor. 50 cycle, 2/5 rpm, 5 watt, 115 vac. 3 wires. 2-1/2" diameter x 2" deep body. 0.186"D x 2-1/2"L round shaft. 3 mounting holes, 2-3/8" c-c. Reversible. Includes capacitor.

$35 each

(MOT) N16-RK-38510

Right angle drive has 24 rpm output. 115 vac (60 Hz) 1/6 hp, 2.8 amps, 1 phase, 1725 rpm Master Electric motor drives this navy antenna array rotator. Output shaft is center, vertical. Also incorporates manual adjust wheel (left). Tripod mounting. 230 pound crate weight. New, unused. Just a few on hand.

$995 each

(MOT) KC1-26T3

Bodine Model X1296. 20 rpm. 220 / 240 vac (50 Hz) 53ma motor operates at 50:1 ratio producing 565 mNm torque output. 1/4" shaft. Reversible. Requires 0.4 µF capacitor (can be found in our cap section). 2-1/4" square x 3" long body.

$39 each

Click here for PDF file

Click here for General Info

Click Here for a Movie | Enlarge Image

(MOT) MA40-7040

Invensys Dura Drive spring return actuator. Two position actuator 35 / IN-LB (4 Nm). 120 vac, 6.4 va, 3.8 watts. Adjustable stop up to 95º rotation. Remove power at any point in rotation and actuator returns to start. V-clamp accommodates shaft up to 5/8" diameter. Measures 2-1/2" x 4" x 7" high. Great for projects like HVAC dampers, visual display animation and repeat high torque operations that require a 90º rotation or less. Normally sells for over $155. Our price...

$75 each - $69 (6+), $60 (25+)

(MOT) KYC-23B2A1

Bodine gear motor, (801VA079). 115 vac, 60 Hz, 8.5 watts, 300 rpm. Torque = 1.7 in. oz. Includes capacitor. 1/4" x 1/2"L shaft. 2-1/4" x 2-1/4" x 2-1/2"L. Harris P/N: 436-0081-000.

*** SOLD OUT ***

(MOT) P11HCC67

Cramer synchronous gear motor. 24 vac, 2.7w, 30 rpm. 1-7/8" diameter body, 1-7/8" center to center mounting ears. 3/16" flatted shaft, 3/8"L.

*** SOLD OUT ***

(MOT) 60321023-01

Gear motor mounting plate. Aluminum. 2-1/2" square.

$9 each

Enlarge Image

(MOT) K276349-160

24 vdc gear motor turns exactly 1 revolution per hour @ 20 vdc, 3/4 rph @ 12 vdc. Includes piggyback power supply. 2" outer diameter x 1-5/8" x 3/4" long.

$45 each