|
|
|
|
|
Solenoid
240vac / 60Hz
|
 |
(MOT) 17157
Liberty Controls linear solenoid. 240 vac,
60 Hz coil. 3/8" travel on #6 threaded plunger post. 1-1/4" x 1-1/2" x
2". Push. |
| $18 each - $15 (3+) |
|
| |
|
|
Solenoid
24vdc / 198 ohms
|
 |
(MOT) 41C24DC-AU
Hart-Advance solenoid. 24 vdc, 198 ohms. 7/16" diameter, 3/4"L shaft. 1" x 1-1/4" x 1-3/4" overall (retracted). Pulls. |
| $12 each - $10 (3+) |
|
|
Solenoid
12vdc / 59 ohms |
(MOT) 41C12DC-AU
Solenoid. 12 vdc, 59 ohms. Otherwise,
same as above. |
|
| |
|
|
Linear Solenoid |
 |
(MOT) P11489D101
Linear solenoid has 6.5 pounds linear
pulling force. 3/8" max stroke. 12 vdc, 12 amps. 2-1/8" outer
diameter x 4-1/2" long. 3/16" bore in connecting
rod. |
|
|
Linear Solenoid |
 |
(MOT) CR9503209F
Solenoid has over 1" stroke.
550 vac, 60 Hz. 2-5/8" x 2-1/2" x 3-1/2" high.
1/4" slot in connecting rod. |
|
| |
|
|
Linear Solenoid |
 |
(MOT) 18CONT230A
Guardian linear solenoid has 4.3 pounds
linear pulling force. 230 vac, 2 amps, 60 Hz. 78 ohm coil.
3" x 2-1/4" x 2-1/8" long. 11/32" wide
space in fork. |
|
|
Solenoid
24 v
|
 |
(MOT) 10-462-5
Nylon connecting arm. 24 vdc coil.
7/8" x 2-7/8" long x 1-7/8" high.
1/4" travel. |
|
| |
|
|
Solenoid
24 v |
 |
(MOT) 53629-83
Deltrol solenoid. 1/8" x 1" shaft,
3/4" stroke,
1" outer
diameter x 2-3/8" behind
panel. 24 vdc pulse. |
|
|
Solenoid
1/2" Stroke |
 |
(MOT) 805000901
6/32 tapped piston, 1/2" stroke. 11/16" outer diameter
x 2-5/16" long.
24 vdc. Flange mount solenoid. |
|
| |
|
|
Solenoid
125 vdc - 3 pound pull |
 |
(MOT) B670
1/2" slotted, drilled piston travels 1". Various
tapped mounting hole
hole on 3" x 1-13/16" x 1-1/2" high frame. 125 vdc, 1580 ohm
coil. 3.02 pounds pull force. |
|
|
Solenoid
24 vdc |
 |
(MOT) S3K5-110
5/16" diameter piston, 4-40 tapped hole, 3/8" stroke.
1/2" diameter
x 1-1/2" long. Base flange. 24 vdc, 50 ohm coil. |
|
| |
|
|
Open Frame Slotted Piston |
 |
(MOT) HC-24-DC-AU
Hanell open frame slotted piston motor. 3/8" diameter
slotted, drilled piston travels about 3/4". 8 oz. pull. Base tapped mounting holes.
1" x 2-1/2" x 1-1/4" high frame.
24-30 vdc, 115 ohm coil. |
|
|
Open Frame Slotted
Piston |
 |
(MOT) 11DC-C-24VDC
Guardian open frame slotted piston motor.
3/8" diameter
slotted drilled piston travels about 3/4".
Various tapped
mounting holes on 1" x 1-7/8" x 1-3/16" high frame. 24 vdc. |
|
| |
|
Open Frame Slotted Piston |
 |
(MOT) 116757
Hart-Advance open frame slotted piston motor.
Drilled piston has 10/32 tapped hole, travels about 1/2". 1" x 1-1/4" x
2" high frame. 24 vdc. |
|
|
Open Frame Slotted Piston
(cont'd) |
(MOT) 53414-61
Deltrol open frame slotted piston motor. 5/16" diameter
slotted, drilled piston travels about 3/4". 15 oz. pull.
7/8" x 1-5/8" x 1-1/16" high frame. 2.8 vdc, 1.4 ohm coil. |
| $17 each |
| |
|
(MOT) 22C-24
Guardian open frame slotted piston motor.
As above but 1/4" diameter piston travels about 1/2". 3/4" x
1-1/4" x 3-1/4". 24 vdc. |
|
| |
|
|
| |
