|
|
|
|
|
Advanced HiVolt Quadrapole Lens Power Supply
6 Outputs of 0 - 30 kv @ 0 - 1 ma |
 |
|
|
(PS) A303/111
Advance HiVolt Quadrapole Lens power supply. 6
outputs of 0 - 30 kv @ 0 - 1 ma. (3 positive and 3 negative). Unit is housed
in a 7" high standard rack mount chassis. This power supply has been designed
specifically to drive a beam steering quadrapole lens. It provides six
outputs each capable of up to 30 kvdc. All high voltage is derived from
individual, very stable inverters each driving its own multiplier. Remote
voltage programming is via four opto isolated differential pairs each with
a sensitivity of 0 - 10 vdc in for 0 - 30 kv out ± 5%. Remote connector
is Winchester type TXAC 34S F2A00. Both voltage and current monitoring is provided as well as
status of operation. The unit operates from 104 - 126 volts, 47 - 63 Hz std. AC power.
The HV outputs are bi-polar. Three negative, three positive. Variable by demand from
0 - 30 kv. The output current is 0 - 1 ma. Short circuit and arc protected. Six brand new HV output cables and instruction manual with
schematics are included. The front panel meters are each labeled for 0 to 30 kv.
There are four 10-turn voltage adjustment pots on the front panel as well as a local
/ remote switch and a power circuit breaker. Indicators light when power is applied.
Otherwise, untested. Weighs 55 lbs. Looks NEW!!! NOTE: This is a potentially HAZARDOUS and
DEADLY supply. Do not purchase if you do not know what you are doing. Surplus Sales
is not responsible for its use or misuse. |
|
| |
|
|
Glassman 0 to -10kv @ 300ma
High Voltage DC Power Supply |
 |
|
(PS)
PS/PH010N300M50
Fully tested and guaranteed!!
American made Glassman high voltage DC power supply. Negative 0 - 10,000
volts @ 300 milli-amps, 3,000 watt precision laboratory,
variable regulated power supply with analog volt / amp metering.
Complete with rolling rackmount cabinet and cooling fans.
All working perfectly and in excellent condition. They are 115v only.
This power supply provides a single
negative output, 0 - 10,000 volts @ 300 milli-amps. The
output voltage is set easily and precisely by a "ten-turn"
fine voltage control knob. The DC supply provides
0 - 10,000 volts @ 300 milli-amps constant volts and
/ or current limit (C/V, C/L). Requires external 10k ohm, 10 turn pot to set current limit.
The analog meters provide accurate
readings of both voltage and current and the output connections
are high grade, high voltage connectors to supply the voltage
to your equipment. Also, rear panel connections are provided
with high voltage interlock, voltage / current, programming / monitoring
capabilities. This is truly a laboratory grade power supply
with hum and noise specifications measured in milli-volts
and supply regulation accurate to ± 0.1%. This is the ideal piece of professional
test gear to check out and evaluate any electronic or electrical
equipment needing high voltage such as TWT's, Klystrons,
Magnetrons, Backward-wave oscillators, High-Power gas lasers,
Electron-Beam welding devices, etc. The weight is 221 pounds + packing. Each supply
and the controller is 19" rack width, fully contained in a small
rolling rack measuring 23" x 31" high x 26" deep. Glassman makes the finest
high voltage power supplies in the world and this power
supply proves it!! |
|
| |
|
|
Heinzinger Power Supply
0 - 10 kv / 0 - 180 ma |
 |
(PS)
HNC10K-180
Heinzinger Hospital-grade
variable power supply. Made in Germany. Current and voltage
limiting. 380v 3- phase 50/60 Hz input. Excellent condition.
19" rack mount. 12-1/4"H x 17"D. Step
down transformer available at most electrical supply houses
to convert 220v to 380v for less than $600. |
| $2,500 |
| |
|
| |
|
|
Korad Power Supplies
0 - 5 kv & 0 - 10 kv |
 |
(PS)
D910032-901Q
0-5 kv Korad compact
high voltage, variable, rack mount supply from Los Alamos
Lab surplus. Turns counting voltage control damaged. Has 2,500v, 0.6 kva
transformer. 115 vac input. 7"H x 18"D. Sold as is. |
| * REDUCED * - $395 |
| |
|
(PS) D910048-901
0-10 kv Korad compact high voltage supply similar
to 5kv unit above. Sold as is. |
|
| |
|
|
PWM Regulated Power Supply
Dual 11 kvdc |
 |
|
(PS) HFA11K502W
Izumi Denki PWM regulated power supply. Dual 11
kvdc, 10 ma. 117 vac primary, 60 Hz. Designed for use on a plasma sign. Includes
schematic.
7-1/16" x 7-1/4" x 2-7/8"H. Brand new, factory packed!! Eight to a carton.
NOTE: Surplus Sales is not responsible for its use or misuse.
Power Supply is completely open and user is subject to dangerous voltages.
|
|
|
High Voltage Power Supply
12 kv @ 1 ma |
 |
(PS) HV-12P-L1
Matsusada Precision Devices high voltage power supply. Made in Japan.
• Input: 15 vdc
• Output: 12 kv @ 1 ma
• Dimensions: 2" x 5" x 1-1/4"H
|
|
|
|
|
Glassman HV Power Supply
-15 kv @ 20 ma |
 |
|
(PS) PS/ER15N20.0Y75
Glassman high voltage power supply. Rack mountable. All remote control. No meters. Voltage / current controlled by adding 10 turn pot to rear terminal strip. Includes AC cord. No HV cable.
• Input: 115 vac, 48-63 Hz
• Output: -15 kv @ 20 ma
• Dimensions: 3-1/2"H x 19" x 19"
|
|
|
Glassman HV Power Supply
-15 kv @ 72 ma |
 |
|
(PS) PS/EQ015N072G27
Glassman high voltage power supply. Rack mountable. Adjustable by adding 10 turn pot to terminal strip on rear. Includes power cord. No manual. No HV probe. New, unused.
• Input: 180 - 253v, 48-63 Hz, 1 phase
• Output: -15 kv @ 72 ma
• Dimensions: 19"W x 3-1/2"H x 20"D
|
|
|
|
Glassman HV Power Supply
±20 kv @ 5 ma |
 |
|
(PS) PS/EH20R05.0D11
Glassman high voltage power supply. Adjustable current / voltage. Dual digital readouts. Locking adjustment dials. Rack mountable. No manual. Optional cable available for $95.00. Used, excellent condition. 2 available. Both supplies work fine to full load voltage.
• Input: 115 vac, 48-420 Hz, 1 phase
• Output: ±20kv @ 5 ma
• Dimensions: 19"W x 5-1/4"H x 21"D
|
|
|
Glassman HV Power Supply
-30 kv @ 10 ma |
 |
|
(PS) PS/ER30N10.0XR9
Glassman high voltage power supply. Adjustable locking dials: current, voltage. Dual meters. Rack mountable. Includes HV cable. No manual. Used, clean. Bent corner on front panel has been straightened. Works fine to full load. HV is always on.
• Input: 115 vac, 48-63 Hz
• Output: -30kv @ 10 ma
• Dimensions: 19"W x 5-1/4"H x 21"D
|
|
| $2,750 each (no cable) |
|
|
| $2,845 each (includes cable) |
|
|
|
|
|
|
|
DC Power Supply
24,500 vdc @ 4.5 amps |
 |
 |
(PS) 2T90
Aydin Radar & EW Division DC power supply. Oil cooled. Spare
part from the Harris plant. Appears to be new, old stock but could be used. Harris P/N: 736-0119-000.
• Primary: 380 - 485v, 3 phase (tapped primary)
• Secondary: 24,500 vdc @ 4.5 amps
|
| |
|
|
Glassman HV Power Supply
±10 kv @ 15 ma |
 |
|
(PS) LG10R15
Glassman Model LG10R15 high voltage power supply. Used. No cover, no cords, no manual. Parts only. Sold as-is.
• Input: 115 / 60 Hz
• Output: ±10 kv @ 15 ma
• Dimensions: 19"W x 5-1/2"H x 17"D
|
|
|
Gamma High Voltage Research
0 - 20 kv @ 0 - 6 ma |
 |
|
(PS) RR30-1R
Gamma high voltage research, RR30-1R. Front panel voltage and current meters and limiting. Includes HV probe. No manual. Rack mountable. Removed from service, very clean.
• Input: 115 vac
• Output: 0 - 20 kv @ 0 - 6 ma
• Dimensions: 19" x 5-1/4" x 20" deep
• Weight: 28 lbs
|
|
|
|
|
Glassman Power Supply
0 - 30 kv / 0 - 10 ma
|
 |
|
(PS) PS/WG-30P10-M4G
Glassman power supply. Rack mountable. A custom unit that we cannot get to work. Multiple interlocks plus special input circuit. Appears complete with no missing or damaged parts. High voltage controls look like standard Glassman. Very clean and it is probably something simple but we can't figure it out. No manual or HV probe. Sold as-is. No returns.
• Input: 115 vac, 48 - 63 Hz, 1 phase
• Output: 0 - 30 kv @ 0 - 10 ma
• Dimensions: 5: x 19" x 19" deep
|
|
|
High Voltage Variable Supply
0 - 32 kv / 0 -
25 ma
|
 |
| |
(PS) BAM-32-25
Universal Voltronics high voltage variable supply
is Los Alamos Lab surplus. Meters read "0-36 kvdc
(high-medium-low)" and "0-30 madc". Variac controlled.
Appears complete. Shorting relay zeros output when high voltage disengaged. 115 vac input. Rack mountable. 17-1/2"H x
16-1/2"D. PARTS ONLY. |
|
| |
|
|
Elma Engineering Transformer
11.1 kv / 8 kva |
 |
(TP) 5272
Los Alamos Lab surplus. Elma Engineering transformer.
3 phase, 220v input. 30kv insulation. Soft rubber insulation on leads cracked at epoxy
housing. Recommend placement of terminal posts on housing to remedy. 11-1/2" x
23" x 17". |
|
|
Hipotronics
12 kv / 1 amp |
 |
(PS) HP12KV-1
Los Alamos Lab surplus. Hipotronics transformer
for giant power supply. 3 phase input. 9" x 16" x 20". |
|
| |
| |
|
