|
|
|
|
|
For Switch Indexes, go to the bottom of the page |
|
|
1 Pole - 11 Throw
7 kv - 30 amps
Radio Switch - Model 86 |
 |
(SWR) 86-1-11
Scientific Radio ceramic
RF switch. Easily handles 7kv. 30º index. 3-3/8" diameter x 3-1/2" behind
panel. 1/4" shaft. Mounts by front support posts 2-7/8" apart.
Switch does not include Radio Switch index. May use 30º index
found elsewhere in this section. Brand new! |
|
|
2 Pole - 11 Throw
7 kv - 30 amps
Radio Switch - Model 86 |
 |
(SWR) 86-2-11N (new)
Scientific
Radio ceramic RF switch. Easily handles 7kv. 30º index. 3-3/8" diameter by
4-3/4" behind panel. 1/4" shaft. Mounts by front support posts 2-7/8" apart.
Switch does not include Radio Switch index. May use 30º index found elsewhere
in this section. |
|
|
|
| $245 each |
|
|
(SWR)
86-2-11U
Same as above except used,
removed. |
| $245 each |
|
|
|
|
2 Pole - 9 Position
13 kv - 30 amps
Radio Switch |
 |
(SWR) 88-2-9
Radio Switch. 36º index. 2 pole, 9 position. 13 kv, 30 amps. 1/4" x 0.967"L shaft. 4" nominal, 5" diameter max. 5-1/2" behind panel depth. Brand new!! |
|
|
3 Pole - 6 Throw
15 kv - 30 amps |
 |
(SWR) 3P6T15-40
Radio Switch ceramic switch with lots of power
handling capability. 30º index. Mounts by three #8 standoffs on front plate. 4-3/4" outer
diameter, 9-1/4" deep behind panel. 1/4" x 1-1/2" shaft. |
|
|
|
|
3 Pole - 11 Throw
13 kv - 30 amps
Radio Switch - Model 88 |
 |
(SWR) 88-3-11/A
Radio Switch 88 series. 4" outside diameter. Frame is 7"L. 3 pole, 11 throw. 13 kv, 30 amp. Front shaft measures 1/4" x 1-1/2". Rear shaft measures 1/4" x 1/2". No index. Must use index found at the bottom of this page. |
|
|
3 Pole - 11 Throw
13 kv - 30 amps
Radio Switch - Model 88 |
 |
(SWR) 88-3-11
Radio Switch 88 series. 4" outside diameter. Frame is 9"L x
4"W x 6"H. 3 pole, 11 throw. 13 kv, 30 amp. Prepped for used in a Scientific Radio auto tuner. Rear of frame has 11
position
wafer for indicator circuitry. 1/4" shaft. Brand new!! Never used. |
|
| |
|
|
3 Pole - 11 Throw
7 kv - 30 amps
Radio Switch - Model 86 |
 |
(SWR)
86-3-11
Scientific
Radio ceramic
RF switch. Easily handles 7kv. 30º index. 3-3/8" diameter by 5-3/4" behind
panel. 1/4" shaft. Mounts by front support posts 2-7/8" apart.
Switch does not include Radio Switch index. May use 30º index
found elsewhere in this section. Brand new! |
|
|
4 Pole - 9 Throw
20 kv - 40 amps
Radio Switch - Model 90 |
 |
(SWR) 90-4-9
36º index. Mounts by front and rear plates. 9" outer
diameter, 15" long. 1/4" front shaft, 1/2" rear. |
|
|
|
4 Pole - 9 Throw
20 kv - 40 amps |
 |
(SWR) 90-3-9
Similar to (SWR) 90-4-9 but index / stop not included. 1/2" shaft
front only. |
|
|
4 Pole - 11 Throw
13 kv - 30 amps
Radio Switch - Model 88 |
 |
(SWR)
88-4-11
Scientific Radio ceramic
RF switch. 4" outer diameter. 1/4" shaft. Switch has no stops.
May use 30º index found elsewhere in this section. Brand new! |
|
| |
|
|
4 Pole - 11 Throw |
 |
(SWR) 88-4-11S Radio switch. 4 pole model has 2 wafers, 11 position. 2 wafers make 2 adjacent contacts at once. (See picture). 1/4" x 2-1/2"L shaft. 4" diameter, 9" behind panel depth. |
|
|
6 Pole - 11 Throw
7 kv - 30 amps
Radio Switch - Model 86 |
 |

Dual,
Two Pole Rotor Contact |
(SWR)
86-6-11
Scientific Radio ceramic
RF switch. Easily handles 7kv. 30º index. 3-3/8" diameter by 3-1/2" behind
panel. 1/4" x 2-3/4" long shaft. Mounts by front support
posts 2-7/8" apart. Switch does not include Radio Switch
index. May use 30º index found elsewhere in this section.
Brand new!
• 6 wafers - Each 11 positions
• 3 wafers - Single rotor contact
• 3 wafers - Dual rotor contact makes two positions at one time (as pictured),
two pole configuration.
|
|
|
|
6 Pole - 2 Throw
10 amps
Radio Switch - Model 80 |
 |
(SWR) 80-32
Radio
Switch model 80. Easily handles 5 kv. 60º index. Silver contacts. Three wafers, each 2P2T.
2-1/2" diameter by 3-3/4" behind panel. 1/4" shaft.
Mounts by front support posts 2-1/4" apart. Adjustable index
wheel. A thought... move contacts from one wafer to another?? |
|
|
7 Pole - 11 Throw
13 kv - 30 amps
Radio Switch - Model 88 |
 |
(SWR) 88-7-11
30º index. Mounts by 3, #8 standoffs on front plate. 4" outer
diameter, 10" deep behind panel with 1/4" shaft extending extra 6-1/2" beyond
that. 1/4" x 2" shaft. |
|
|
|
|
7 Pole - 11 Throw
13 kv - 30 amps
Radio Switch - Model 88 |
 |
(SWR) 88-7-11L
Same switch as (SWR)
88-7-11 but each contact has a long 3/8" wide
silver strap pre-attached for convenient installation. |
|
|
10 Pole - 9 Throw
4 kv - 8 amps
Radio Switch - Model 78 |
 |
(SWR) 78-10-9
Deluxe
radio switch model 78, a 10P9T configuration. Each of 5 thick
ceramic
wafers has two poles
with 9 positions per. 3" outer diameter, 6-1/2" long
behind panel, 1/4" shaft. Bushing mount and by support head. |
|
|
|
|
Index with Insulated Shaft
30º Index with Movable Stop |
 |
(SWR) 5P3549
CTS index with insulated shaft. 30º index with movable stop. 1/4" x 7/16" long front shaft. 3-7/8" long double flatted nylon rear shaft. 1-1/16" c-c mounting ears. |
|
|
|
|
|
Shaft Extension
Switch Index, 5” Extension |
 |
| |
(SWR) S10507
CTS shaft extension 30º index. 1/4" shaft
index. 1/2" long shaft in front, 5" behind. 1-1/16" center - center
on mounting ear holes. 3/8" bushing. |
|
|
Shaft Extension
Switch Index, 3.75” Extension |
 |
| |
(SWR) S10508
CTS shaft extension 30º index
same as (SWR) S10507 (left)
except 1/2" long shaft in front, 3-3/4" behind. |
|
| |
|
Ultra Long Shaft Extension |
 |
(SWR) 204111
CTS ultra long shaft extension. 30º index. 5-1/2" x 1/4" shaft on front / bushing end. 7" x 1/4" shaft on back side. 1-1/16" c-c mounting ears. Bushing requires 3/8" hole. |
|
| $15.50 each - $14.25 (6+), $13 (25+) |
|
|
|
|
|
|