|
|
|
|
|
Metal Knob |
 |
(KNB) K1325
Metal knob. 1/4" bore. 2 set screws. 0.556" diameter x 1.513" overall, 0.633" high. New, but a few chips. |
|
|
Solid Aluminum Knob |
 |
(KNB) PV-19A-6MM
Solid aluminum knob. Knurled edge with alignment stripe. 2 set screws. 6mm (0.237") bore. 3/4" diameter, 0.625" high. Use in front panel devices. |
|
| |
|
Alco Knob |
 |
(KNB)
KA-700B1/4
Alco knob,
solid aluminum. 1/4" bore, 2 set
screws. Black anodized. 3/4" diameter x
5/8" high.
White index line on side. Matches KA1250 & KA900B. Brand
new!! |
|
|
Alco Knob |
 |
(KNB)
KA900B1/4
Alco knob,
solid aluminum. 1/4" bore, 2 set
screws. Black anodized. 0.9" diameter x
5/8" high.
Matches KA1250B. Brand
new!! |
|
| $3.75 each - $3.45 (6+), $3 (25+) |
|
|
|
|
|
|
|
Alco Knob |
 |
(KNB)
KA1250B1/4
Alco knob,
solid aluminum. 1/4" bore, 2 set screws.
New, but were stored in large bags. Black
anodized finish is scuffed & pinged.
1-1/4" diameter x 3/4" high.
Matches KA900B. |
|
|
ALCO Bar Knob |
Very, very nice! |
(KNB)
KCB-600B
Alco bar knob. Solid aluminum.
Anodized black pointer line. 1/8" bore. 2 set screws.
5/8" diameter x 3/4" high. Very nice! |
|
| $4 each -
$3.50 (6+), $3 (25+) |
|
|
|
| $4.50 each
- $3.90 (6+), $3.65 (25+) |
|
|
|
|
|
NEW!! |
Very, very nice! |
(KNB)
A12
A rugged knob indeed.
Cast aluminum. We found a box of these that
have been shelved for 40 years at least. 1/4" shaft
with 1 set screw. 1-1/2" long ways x 7/8" high. |
|
|
Collins Radio |
 |
(COL)
647-3489-001
Aluminum knurled,
tapered knob as found on older 50's and 60's vintage Collins and
other equipment. 1-1/2" diameter. |
|
| $10 each -
$9 (5+), $8 (25+) |
|
|
|
|
|
|
|
ALCO |
Very,
very nice! |
(KNB) K-900A
A staple of the Alco knob line for
many decades. Machined aluminum, clear natural finish, 3
flutes and black alignment stripe. 1/4" shaft with 2 stainless
set screws. 15/16" diameter x 5/8" high. |
|
|
Solid Machined Aluminum
Pointer Knob |
 |
(KNB) ALUM1.25
Solid machined aluminum pointer knob. Pointer is slot-cut into
skirt. Spring clip for 1/4" diameter “D” shaft. No set screw. 1-1/4" diameter
skirt. 11/16" diameter knurled finger grip. |
|
| |
| |
|