Rotary Switches
Home Page Switches Rotary Switches Power Tap Switches
 
 
Power Tap Switches

Isolated Load Break Switch
    VZ16 KCG2T
Fully Assembled Kit Individual Unit Grounding / Earthing Module Operator for V5
(SWR) V5-055173/K
Square D - Telemecanique. 125 amp, 3 pole. To 660 vac, 60HP. 4-7/8" x 3-5/8" x 3-1/2" high. (Without operator or grounding module). UL & CSA listed. Sold as a kit.
$75 each - $70 (4+), $65 (20+)

Power Tap Rotary Switch
3 Pole 15 Position

(SWR) 303JK16
Power tap rotary switch. 3 pole, 15 position. 5 amp @ 125 vac. Break before make. Watertight. Terminals labeled A thru P. P is common. Position 1 is no connection. Positions 2 thru 16 connect P to A thru, stops can be inserted to limit number of positions. 3-13/16" square mounting plate. Mounting holes on 2-5/16" centers. 3" behind panel. NSN: 5930-00-786-3056.
 

Power Tap Switch
DPDT / 600 vac / 60 amp

(SWR) N17-S61019-8827
Arrow - H&H power tap switch. DPDT. 60 amp @ 600 vac. As operator rotates switch, every other position opens all contacts. Mounts on front panel by 3/8" inner diameter stand-offs. 4-3/4" x 4-3/4" x 5-1/2" behind panel depth.
NSN: 5930-548-4902.
$75 each
 
$139 each

Rotary Tap Switch
SPDT / 10 amp
(SWR) 122902LP
Rotary tap switch. SPDT, 10 amp contacts. 45º indexing. Momentary, center off, 2 pair isolated contacts. Spiffy lever handle. Mfg. P/N: 122902LP. NSN: 5930-00-428-8931.
 

Power Tap Switch
2P1T
(SWR) M15291/6-012
Power tap switch. 2P1T. 30 amp @ 500 vac, 30 amp @ 250 vdc. Switch has 5 positions with contacts made on only one position. 3-1/2" diameter, 3" behind panel depth.
NSN: 5930-01-271-5386.
$47.50 each
 
$45 each

Tap Switch
2 Pole / 50 amp
(SWR) 807A785G01
Westinghouse 2 pole tap switch. 50 amp. Rotating front pointer knob from Position 1 - Off - Position 2 makes or breaks that set of contacts. All open in off position. Removable sides. Labeled escutcheon panel. 2-1/2" x 4-1/2" x 6-3/4"L with knob. Made in 1980.
 

Tap Switch
Single Pole Shorting / 125 vac @ 10 amps
(SWR) 32901LB
125 vac @ 10 amps Electro Switch shorting tap switch. Rotates through one to three positions shorted. 1-3/4" diameter, 1-1/4" behind panel.
$65 each
 
$22 each

Power Tap Rotary Switch
4 Pole 12 Position / 125 vac / 7.5 amp
(SWR) 26204G
Power tap rotary switch. 4 pole, 12 position. 7.5 amp @ 125 vac. Silver contacts. Break before make. Adjustable stops. 30º indexing. No common, adjacent contacts are connected as rotation occurs. NSN: 5930-01-062-2496.
 

Rotary Switch
2 Pole / 125 vac / 5 amp
(SWR) 33201A3
125 vac @ 5 amps ESCO tap switch with following three positions: Position 1: B-C, F-G. Position 2: A-B, E-F. Position 3: A-C, D-E. 1-7/8" diameter, 1-1/4" behind panel. Includes knob.
$119 each
 
$15 each

Rotary Switch
2 Pole / 125 vac / 10 amp
(SWR) ARR-4P
125 vac @ 10 amps Arrow tap switch with the following four sections: Sections 1&2: 1P4T. Section 4: 1P3T. Section 3: Continuous shorting three of four terminals as rotated. 3-3/4" max outer diameter.
 

Rotary Switch
2P3T / 125 vac / 10 amp
(SWR) 8641BK
Electro Switch power tap switch. 125 vac @ 10 amps. Dual section has two positions plus neutral "off". 2-7/8" square, 2-3/4" behind. Includes knob. 45º index.
$45 each
 
$35 each
 

Power Tap Switch
2P7T
(SWR) 9000-S6202
ES Corp power tap switch. 2P7T. 10 amp, 125 vac. 5 amp, 125 vdc. 45º index. 2-3/4" square, 2-1/2" behind panel depth. 2-5/16" c-c mounting sockets. NSN: 5930-548-3274.
 
 
$50 each
 

Power Tap Switch
3 Poles / 8 Descrete Positions

(SWR) S62-74422
Power tap switch. 3 poles, 8 descrete positions each 5 amp, 125 vac. Position 1: Terminals A-B. Position 2: Terminals B-C. Position 3: Terminals C-D and so on around the switch until H-A and then repeat. Continuously rotates but provision for stop screw. NSN: 5930-001-2785.
 

Tap Switch
5 Position / 3 Phase / 35 amp

(SWR) C26C/A272-600E
Kraus & Naimer BLUE LINE 600 vac @ 35 amps (up to 25 hp) tap switch is perfect for switching primary taps, motor winding or any application you need the convenience of selecting multiple taps without rewiring. Removable front escutcheon is 3-7/16" square. Switch body is 2-3/16" behind panel. New in the box.
$45 each
 
$125 each

Power Tap Rotary Switch
5P5T / 125 vac / 5 amp

(SWR) A15110
Electroswitch power tap rotary switch. 5P5T. 125 vac, 5 amp. "H" is common. Can be set up to 7T by moving stop silver plated contacts and screws. 2" diameter, 2-5/8" behind panel depth. NSN: 5930-00-835-9002.
 

Power Tap Rotary Switch
13P2T / 500 vac / 3 amp
(SWR) 122613LC
Electro Switch power tap switch. 13 pole, double throw (13P2T). 500 vac @ 3 amps, 250 vac @ 5 amps, 125 vac @ 10 amps. Spare part for nuclear sub. Breaks before make. Includes bar knob and all hardware. 6.94" long x 2.5" diameter. NSN: 5930-01-175-8332.
$75 each
 
$195 each

Power Tap Rotary Switch
14 Poles / Each SPST
(SWR) BM90-1463-2
Power tap rotary switch. 14 poles, each SPST, normally closed. Spring return shaft opens all 14 contact sets with rotation. 10 amps. Rubber shroud insulates each layer, wire / connections. 2-1/4" diameter, 2-3/4" behind panel. 1/4"D x 1/2"L shaft. NSN: 5930-505-4292.
 

Rotary Switch
500 vac / 250 vdc / 60 amp
(SWR) SCC67038-1
Electro Switch power tap switch. 500 vac / 250 vdc. Make before break 60 amp contacts. 2P2T. 7" diameter, 4" behind. 3/8" x 1-1/8" shaft. 90º index.
$35 each
 
$110 each