|
|
|
|
|
Circuit Board Mount
1P8T & 1P5T |
 |
(SWR) 71MY233332
1/8" / 1/4" concentric
shafts. 1P8T on the back wafer (1/8" shaft), 1P5T on front wafer, 1/4" shaft. |
|
|
Grayhill
2P5T
Circuit Board Mount |
 |
(SWR) 71CY231679
14 pins. 1/8" / 1/4" concentric shafts. 0.3" diameter,
1-3/8" behind panel, 11/16" outer diameter, 1/8" center shaft
with slot tip drives through center of switch and pokes out rear as seen in graphic.
Rear chamber is open for extra pot section or switch. |
|
| |
|
|
Rotary Switch
Concentric Shafts
Inner Shaft: 2P5T - Outer Shaft: 4P4T |
 |
(SWR) 54YY2145
Grayhill rotary switch. Concentric shafts. Inner 1/8" shaft
is 2P5T. Outer 1/4" shaft is 4P4T. 1-1/2" long shaft cluster. 30º index.
1-1/4" diameter, 2-1/4" behind panel.
NSN: 5930-141-0455. |
|
|
AT-300 Antenna Tuner Switch
2P6T |
 |
(SWR) AT-300
Original AEA replacement rotary fits the popular AT-300
Antenna tuner (we sold over 800 tuners!) 1-1/2" diameter, 1-1/8" deep behind
panel.
1/4" shaft. |
|
| |
|
Rotary Switch
3P12T |
 |
(SWR) H-215524
CTS rotary switch. 3 wafer. 1P12T each wafer. 30º index, 2 amp, sealed. 1-1/8" x 1-1/8" square. Requires 3/8" mounting hole, 1-3/8" behind panel depth. 1/4"D x 3/8"L shaft. 3/8"D x 3/8"L bushing. |
|
|
Rotary Switch
4P3T
|
 |
(SWR) H-137920
CTS rotary switch. 1 wafer. 4P3T. 2 amp, sealed. 1-1/8" x 1-1/8" square. Requires 3/8" mounting hole, 3/4" behind panel depth. 1/4"D x 3/8"L shaft. 3/8"D x 3/8"L bushing. |
|
| $15 each - $13.50 (6+), $12 (25+) |
|
|
|
|
|
|
Collins Sealed Rotary Switch
4P6T |
 |
(COL) 259-2768-010
Collins sealed rotary switch has 2 wafer (2P6T each),
30º index, gold 3 amp contacts. 1-1/2" diameter, 3/4" deep behind panel.
1/4" shaft. |
|
|
Radio Switch
4P13T |
 |
(SWR) MS14B4
Radio switch sealed rotary switch has
4 wafers (1P13T each), 25.43º index,
10 amp contacts. 2-3/4" diameter, 1-3/4" deep behind panel.
1/4" shaft. |
|
|
|
| $49 each -
$39 (3+), $35 (10+) |
|
|
|
|
|
JBT Sealed Rotary Switch
4P13T |
 |
(SWR) MAS14-4
JBT sealed rotary switch has 4 wafers (1P13T each),
25.43º index, 10 amp contacts. 2-1/8" diameter, 1-3/4" deep behind panel.
1/4" shaft. |
|
|
JBT Sealed Rotary Switch
4P19T |
 |
(SWR) MS20B4
JBT sealed rotary switch has four wafers (1P19T each),
25.43º index, 10 amp contacts. 2-3/4" diameter, 1-3/4" deep behind panel.
1/4" shaft. |
|
| |
|
|
Key Switch
5PDT |
 |
(SWR) 5189177
Janco sealed explosion proof key switch. 5 wafers, 1PDT
each. 5 amp, 115 vac contacts. 2 keys supplied. Key not removable while in on position.
Metal head, two tapped mounting holes. 1-1/2" diameter, 3-1/4" behind
panel. |
|
|
Electroswitch
6P6T |
 |
(SWR) 1J54A5/6
Electroswitch sealed explosion proof rotary with removable
stop to set 5 or 6 positions (factory set at 5). 6 wafers, 1P6T each. 1 amp contacts.
30° index. 1-1/4" diameter, 2" behind panel. |
|
| |
|
|
Rotary Switch
6P2T |
 |
(SWR) H-227143
CTS rotary switch. 2 wafer, 3P2T each wafer. 30º index, sealed. 1-1/8" round. Requires 3/8" mounting hole, 13/16" behind panel depth. 1/4"D x 3/8"L shaft. 3/8"D x 3/8"L bushing. |
|
|
Sealed 5 amp
7P6T |
 |
(SWR) 33307A
Electro Switch sealed 5 amp, 125 vac rotary
switch. 7 wafers, 6 positions. 1/4" shaft. 2" x 4" behind panel. |
|
|
|
Rotary Switch
8P3T |
 |
(SWR) H-229814
CTS rotary switch. 3 wafer, dual concentric shaft. Top 2 wafers on 1/4" shaft 4P3T each. Bottom wafer on 1/8" shaft 6P2T. 2 amp, sealed. 1-1/8" x 1-1/8" square. Requires 3/8" mounting hole, 1-3/4" behind panel. 1/4"D & 1/8"D shaft. 3/8"D x 3/8"L bushing. |
|
|
Janco Switch
Three 12P10T |
 |
(SWR) 2235
Janco switches mounted in this "Test Selector" control
head. three 12 wafer, 12P10T 5 amp switches mounted on this head have continuous rotation.
The left switch is independent, the right two are ganged to one shaft. NSN: 5930-944-6189. |
|
| |
|
|
Rotary Switch
14 Section - 14P4T |
 |
(SWR) 48-1955-2
Janco rotary switch. 14 section = 14 pole, 4 throw.
8 make before break, 6 break before make. 36º index, 5 amp contacts. 1.1" body
diameter, 5-3/4" behind panel. 1/4"D x 3/8"L shaft. NSN: 5930-00-975-2212. |
|
|
Stackpole
14P6T |
 |
(SWR) 73-5859
Stackpole dust proof rotary switch has 7 wafers (2P6T
each), 30º index, silver 1 amp contacts. 1-1/2" diameter, 2-1/2" deep
behind panel. 1/4" shaft. |
|
| |
|
Rotary Switch
12P2T |
 |
(SWR) H-145482
CTS rotary switch. 2 wafer, 6P2T each wafer. 2 amp, sealed. 1-1/8" x 1-1/8" square. Requires 3/8" mounting hole, 1-1/8" behind panel depth. 1/4"D x 3/8"L shaft. 3/8" x 3/8" bushing. |
|
|
Rotary Switch
16 Pole - 3 Position |
 |
(SWR) 5P11738
CTS rotary switch. 16 pole, 3 position. 2 amp contacts. Mounts in 3/8" hole. 1/4" diameter x 5/16" long shaft. 1-1/2" diameter x 1-1/4" behind panel depth. |
|
| $10 each - $9 (6+), $8 (25+) |
|
|
|
| $10 each - $9 (6+), $8 (25+), $7 (100+) |
|
|
|
|
|
| |
