40 kv to 250 kv Power Supplies

Hipotronics Hi-Pot Tester
0-40 kvdc, up to 100 mA

(EQP) HIP-850-160/5331
Hipotronics hi-pot tester. Output is controlled by a large front-panel variac. Voltage metering is in 3 ranges: 0-10kV, 0-25 kV, and 0-50 kV. Current metering is also in 3 ranges: 0-40 mA, 0-80 mA, and 0-160 mA. Three phase front panel breaker for all power as well as a single phase breaker for just the control unit. High voltage on/off push-button switches as well as a reset pushbutton. Sensitivity control for leakage trip point from microamps on up. Both control unit and high voltage tank are mounted on castors for easy movement. Power cord for 3 phase power is 6 feet. Control, power and ground cable between control unit and high voltage tank are 12 feet. High voltage output cable is about 30 feet long with clips. It is RG-8 coax and is permanently attached. Unit manufactured in 1973. Fully tested and reconditioned.

  • Output: 0 to 40kvdc @ up to 100 ma
  • Control Unit Dimensions: 41-1/2"H x 21"W x 25-1/2"D
  • High Voltage Tank Dimensions: 32"H x 31"W x 32"D
  • Weight: over 2,000 lbs
$18,750 each
Spellman Power Supply
0 to -80 kv @ 75 ma / 6 kw
(PS) STR80N6X4568
Spellman power supply. Negative polarity. Includes 83 foot long output cable. Brand new in factory crate!!
  • Input: 180 - 264 vac, 3 phase, 50-60 Hz
  • Output: 0 to -80 kv @ 75 ma / 6 kw
  • Dimensions: 10.5"H x 19"W x 21"D
$15,795
Glassman HV Power Supply
0 to 40 kv @ 0 to 15 ma
(PS) PS/EW40P15.0Y15
Glassman High Voltage positive output power supply. Analog meters on the front panel display output voltage and current. Voltage and current output are adjustable by 10 turn controls on the front panel. Optional control of output and metering from a rear panel terminal strip. Includes slow start that ramps up high voltage output over 30 seconds after HV on is enabled. Front panel "High Voltage On" pushbutton is disabled and high voltage output is enabled by applying the reference voltage to a BNC jack on the rear panel. Includes manual, power cord and high voltage cable.
  • Input: 102v - 132v RMS, single phase 48 - 63 Hz
  • Output: 0 to 40 kv @ 0 to 15 ma
  • Dimensions: 19"W x 3-1/2"H x 16-1/4"D
$3,500 each

Spellman HV Power Supply
Positive Output: 0 to 50 kv @ 0 to 40 ma

(PS) SL50P2000X3500
Spellman high voltage power supply. Positive output. AC input on pigtail from rear panel. Front panel voltage & current adjust. LCD voltage & current meters. Slow start circuit to ramp up high voltage output. Arc Detect / Arc Quench / Arc Count disables high voltage output for about one second when an arc is detected, then ramps up the high voltage to the pre-set level. Numerous front panel status and fault indicators. All functions can be remoted. Includes manual and high voltage cable. New, unused!!

  • Input: 220v, 1 phase
  • Positive Output: 0 to 50kv @ 0 to 40 ma
  • Dimensions: 3-1/2"H x 19"W x 19"D
  • Weight: 26 lbs
  • Axcelis P/N: 210000067B
$6,200 each
Glassman HV Power Supply
Positive Output: 40 kv
(PS) PS/WH-40P12-X85
Glassman high voltage 40kV positive output power supply. Dual analog front panel meters. Dual front panel output voltage and current limiting adjustments via 10 turn pots. Optional remote control and metering via rear terminal strip. Also includes slot-adjust H.V. limit control via 10 turn pot on the rear panel. Requires 5v TTL level signal to a rear panel BNC connector to enable the H.V.

The unit was designed to simultaneously provide the same high voltage to 3 devices. Therefore, there are 3 paralleled high voltage output connections. Total combined current output is controlled by the front panel control and is a maximum of 12 mA.

Includes 25' power cord, a single high voltage cable and manual. Reconditioned. Requires 115 vac 48 to 63 Hz, single phase power.
$2,900 each

Glassman Driver
+40 kv @ 25 ma

(PS) PS/EX040P025
Glassman driver. +40 kv @ 25 ma. Includes piggy-back Varian controller E17079450 / E12002151/3. 5-1/4" x 22" x 19" rack. NOTE: Driver only. Stack not included. Used.
$1,200 each

Glassman Power Supply
4 kw / 40 kv / 100 ma Positive Output

(PS) PS/LH040P100GHI
Glassman PS/LH040P100GHI power supply. 4 kw, 40 kv, 100ma positive output. AC input on terminal strip on rear panel. Front panel voltage & current adjust. Voltage & current meters. Arc quench senses load arc and shuts down HV output for 20 milli-seconds. Arc count shuts off supply for 5 seconds after 5 arcs @ one per second, then restarts. All functions can be remoted. Includes manual. No cables.
Brand new and unused!!

Input: 208v, 3 phase
Output: 0 - 40 kv @ 0 - 100 ma
Dimensions: 10-1/2"H x 19"W x 24"D
Weight: 60 lbs
$9,500 each
Glassman HV Power Supply
0 - +50kv @ 80 mA
(PS) PS/EL50P00.8D11
Glassman HV power supply. 0 - +50kv @ 80 mA. Dual front panel voltage and current digital meters and 10 turn pots for adjustment of voltage and current limits. No rear panel connections for control or monitoring. No external interlock connection. Includes power cord and HV cable.

  • Input: 118v, 48-420 Hz
  • Output: 0 - +50kv @ 80 mA (Positive)
  • Dimensions: 19" x 3-1/2" x 18"
$2,775

Glassman Power Supply
0 to -80 kv @ up to 1.5ma

(PS) PS/LG-80N-1.5
Glassman power supply. 0- -80 kv @ up to 1.5ma. Negative output only. Voltage adjust via 10-turn pot on front panel. Dual analog meters. Includes power cord and high voltage cable. 19" rack. 8-3/4"H x 17"D. Unit is fully tested and operational.
$4,300 each

Glassman HV Power Supply
Negative Output: 0 to 135 kv @ 0 to 16 ma

(PS) PS/LT125NO16YG4
Glassman high voltage power supply. Negative output has been modified to 135kv. AC input on pigtail from rear panel. Front panel voltage & current adjust. Analog voltage & current meters. Incorporates a Current Limit or Current Trip mode. When in Current Trip mode, the output voltage drops to zero when output current exceeds the current set point. Multiple safety interlocks. Many functions can be remoted. Includes manual and 10' high voltage cable.

Input: 220v, 1 phase
Output: 0 to 135kv @ 0 to 16 ma
Dimensions: 8.78"H x 19"W x 20"D
Weight: 47 lbs
$11,975 each

Hi-Tek Power Supply
0 to 80kv @ 200ma

(PS) OL20K/803/20
Hi-Tek power supply. Brand new! The 20 kw OL20K/803/20 power supply is a high performance switched mode unit designed and manufactured by HiTek Power. It is a fully regulated closed-loop system capable of generating 80kv @ 200ma continuously, with a 270ma surge available for up to 1 second at reduced output voltages. Control is maintained down to a few hundred watts. Remote control of voltage and current programming, voltage & current monitoring, HV on lamp and interlocks.

The power supply comprises two units, a rack mounting or free-standing power converter through which remote controls are facilitated and a separate HV unit employing a modular disc construction. Three cable assemblies, one for AC power drive to the HV unit, one for feedback and monitoring and an earth bonding cable connect these two units. These cable assemblies are supplied with the equipment. Brand new!! Includes inter-connect cables.

  • Input: 208v, 50/60 Hz, 3 phase
  • Output: 0 to 80kv @ 200 ma
  • Driver Dimensions: 24" x 10-1/2" x 19" rack, (64 kg)
  • Stack Dimensions: 34" x 20" x 23"H, (86.5 kg)
  • Axcelis P/N: 210000121
$35,000 each

Hi-Tek Power Supply
0 to 80kv @ 200ma

(PS) OL20K/803/24
Hi-Tek power supply. Brand new!! The 20 kw OL20K/803/24 power supply is a high performance switched mode unit designed and manufactured by HiTek Power. It is a fully regulated closed-loop system capable of generating 80kv @ 200ma continuously, with a 270ma surge available for up to 1 second at reduced output voltages. Control is maintained down to a few hundred watts. Remote control of voltage and current programming, voltage & current monitoring, HV on lamp and interlocks.

The power supply comprises two units, a rack mounting or free-standing power converter through which remote controls are facilitated and a separate HV unit employing a modular disc construction. Three cable assemblies, one for AC power drive to the HV unit, one for feedback and monitoring and an earth bonding cable connect these two units. These cable assemblies are supplied with the equipment.
  • Input: 208v, 50/60 Hz, 3 phase
  • Output: 0 to 80kv @ 200 ma
  • Driver Dimensions: 24" x 10-1/2" x 19" rack
  • Stack Dimensions: 34" x 20" x 23"H
  • Axcelis P/N: 100024200
$35,000 each

Hi-Tek Dual Range Power Supply
0 to +100kv @ 6kw / 5kv @ 1kw

(PS) OL8000/OL1K
Hi-Tek dual range power supply. Brand new! Includes manual and all interconnect cables. NOTE: This multi-component supply is very heavy and is shipped Motor Freight in a crate.

  • Axcelis P/N: 10041740

  • Includes:
  • (1) 2200187 High Voltage Power Supply 0 to +100kv, 6000w single linear - Hi Tek P/N: OL8000/104/30
  • (2) 2001065 High Voltage Divider - Hi Tek P/N: OL8000/104/30
  • (1) 210000077 High Voltage Power Supply AC/DC 5.0kv, 1000w - Hi Tek P/N: OL1K/502/09
  • (1) 1650650 Cable HVPS AC Power
  • (1) 5700286 Cable Control / Readback 0.08M long - Hi Tek P/N: A1026563
  • (1) 5700287 Cable AC Power 5kv HVPS 1M long
  • (1) 5700377 Cable 6M Coax SHV to SHV 5kv - Hi Tek P/N: 1028388-T
  • (1) 5700378 Cable 6M 9 Cond D-Sub to D-Sub HV Readback - Hi Tek P/N: A1028389
  • (1) 5700379 Cable 6M 12P FEM to 12P FEM Multiplier DRIVE - Hi Tek P/N: A1028439
$25,000 each

Hi-Tek Dual Power Supply
0 to +100kv @ 6kw / 5kv @ 1kw

(PS) OL8000/OL400
Hi-Tek dual power supply. Brand new, never used. The OL400/502/36 has been designed to function in tandem with the OL8000/104/30 power supply, offering a superior ripple and noise performance at output levels below 5kv. In this capacity, both units may be controlled via the OL 400 remote control port. Full set of manuals and schematics are included with your purchase.

The OL400502/36 high voltage power supply is a custom derivative of the proven OL400 series, incorporating the latest switch mode technology to achieve a high performance and excellent reliability within a compact and lightweight assembly. For more information, click here.
  • Input: 208v, 3 phase
  • Output: OL8000/104/30: 0 to 100kv @ 600kw, OL400/502/36: 0 to 5kv @ 500w
  • Interface: 34 way Winchester MRAC-34S
  • OL8000 Dimensions: 22"D x 7"H x 19" rack
  • OL400 Dimensions: 17"D x 3-1/2"H x 19" rack
  • Stack Dimensions: 22" x 17" x 26"H
  • Weight: 130 kg
  • Axcelis P/N: 10023820

  • Consists of:
  • (2) HV divider HVD 120/04 Hi-Tek 10,000 – Hi Tek P/N: HVD 120/04
  • (1) HVPS 0 TO +5kv 500w Single Linear – Hi Tek P/N: OL400/502/36
  • (1) HVPS 0 TO +100kv 6000w Single Linear – Hi Tek P/N:OL8000/104/30, Stack included

  • CABLES AND MISC ITEMS INCLUDED AS FOLLOWS:
  • Cable Assembly 3 phase, 208 vac, Input 3M/39”
  • Plug 20a, 250v NEMA L6-20PNYLON – Hubbell P/N: HBL2321
  • Cable Multiplier Drive 1.9M Long – Hi Tek P/N: A1020531
  • Cable Coaxial 5kv 1.1M Long – Hi Tek P/N: A1027894
  • Cable HV Readback 1.8M Long – Hi Tek P/N: A1020532
  • Cable Control / Readback 0.08M Long – Hi Tek P/N: A1026563
  • Cable AC Power 5kv HVPS 1M Long – Hi Tek P/N: 5KV HVPS POWER CORD
$23,750 each

HiTek Power Supply - 2 Units - Series OL8000 HV Unit
0 to +80 kv @ 60 ma (Variable)

(PS) OL8000/803/44
Hi-Tek power supply. 2 units, Series OL8000 HV unit. Variable 0 to 80 kv @ 60 ma. Fast recovery. Driver / stack cable. HV output cable. Brand new!!

This specification is for an 80kV / 60mA OL8000 power supply, consisting of a 19" rack mounted converter unit, and a 19" rack mounted air insulated HV unit. The unit has been optimized for fast recovery after an arc condition, when used in conjunction with customers fast switch circuitry. Click here for full information (PDF file).

    2 units:
  • Dimensions: 19" x 7" x 26" with rear plug
  • Dimensions: 19" x 7" x 21" with rear plug

  • Axcelis P/N: 100018050
$13,950 each

Advance HiVolt Ion Beam Power Supply
0 to +140 kv @ 0 to 114 ma

Includes 2 Drivers & 2 Stacks
(PS) OL8000/144/08
Advance HiVolt Ion beam power supply. 0 to +140kv @ 0 to 114ma. Input: 208v, 3 phase, 34 amps 48 / 62 Hz.

The OL8000/144/08 supply comprises two identical 140kv positive rated OL8000 power supplies remotely controlled via a common interface unit. The system operates in a master-slave mode. The master supply operates as a conventional voltage stabilizer supply. The slave supply operates as a current stabilized supply, the current of which, tracks the output current of the master, thereby doubling the output of a single supply. The output rating of the combined supplies is 16kw (114ma) at 140kv with a start-up surge capability in excess of 400ma in the region of 25kv. Each driver / stack is in its own shipping crate. About 300 pounds each with crate. Manual is included. New in original cartons and crates!
$33,000 each

Wallis Voltage Multiplier Stack
+100 kvdc - 100ma

(PS) A1006129
Wallis HiVolt high quality voltage multiplier stack. This multiplier was removed from a linear accelerator used for ion implantation. It is extremely dangerous and extremely impressive at the same time. Input is about 14 kvac and obtains +100 kvdc at up to 100 mA output. The output is via a deep drawn aluminum electrode size: 22"W x 17"D x 6"H. The overall height of the stack is 21" with a 21"W x 17" base. Construction is completely modular with eight multiplier stages each on its own PCB. Easy connection of HVAC via two banana jacks on frame. Multiplier weighs 70 lbs.

NOTE: This is a potentially HAZARDOUS and DEADLY supply. Do not purchase if you do not know what you are doing. Surplus Sales is not responsible for its use or misuse.
$3,500 each