Test Equipment: Miscellaneous

(EQP) G-10

Vintage Globe open circuit tester. Test battery cells. New, unused. Only one available.

$45

Enlarge Image | Front Panel

(EQP) OL-750-R

Omega benchtop electronic load. Input: 88 - 135v AC @ 50/60 Hz. Output: 0 - 60v DC @ 0 - 60 amps, 750 watts. 17" x 7" x 5.5"H. Used. Tested - guaranteed. Every bench should have one of these test loads for maintaining low voltage power supplies.

$350 each - $325 (3+)

Enlarge Image | Side View | Rear View

(EQP) 478A

General Microwave automatic peak power meter. 17" x 19" x 7"H.

$250

Enlarge Image | Alt Image

(EQP) LCR740

Leader LCR bridge. .001 Ω to 11M Ω. 1pf to 11,00UF. .1uh to 110H.

$150

Enlarge Image | Alt Image | | Label Image

Enlarge Image | Alternate Image

(EQP) MBV-4

Shester engineering magnet magnetizer. This supply will magnetize any magnet. All magnets need initial and maintenence magnatizing. 250lbs.

Input: 120v, 60Hz, 20a 1 phase
Output: 0 - 115v, 0-21A, 0-47,000. Aj DC. 10-1/2" x 13 deep x 20-1/2"W.
Dimensions: 17" x 13" x 5.5"H

$995

Enlarge Image | Top View | Banana Plugs

(EQP) DAA-60

General Resistance "Dial-An-Amp" adapter. Banana plugs in / out.

$95

(EQP) HP16055A

HP Test Fixture. Provides electrostatic & light shielding for stable PA measurement. 50Hz - 2Mhz range.

$80

(EQP) 111/274-104

Taylor Hobson auto-collimator, Type B.I. with lamp. 1 division = 1 second. Used for non-contact measurement of angles. Includes cable, 3 extra bulbs and transformer. In original, solid wood case, original hardware. Keys are missing. Sold as-is. Manufactured in Leicester, England.

$275

(EQP) HP-85046A

Hewlett Packard S-Parameter test set. 300 KHz - 3 GHz, 50 ohms. Source: Bogdan.

$1,475

(EQP) HP-8745A

Hewlett Packard S-Parameter test set. 0.1 - 2.0 GHz. Excellent condition. Source: Bogdan.

$995

(EQP) HP-8746B

Hewlett Packard S-Parameter test set. 0.5 - 18.0 GHz. Includes 8411A harmonic F18 converter. 0.11 to 18 GHz.

$1,995

(EQP) HP8754A

Hewlett Packard HP8754A network analyzer. 4 MHz to 1.3 GHz. Includes swept source, 3 input narrow-band, tuned receiver and provides both rectangular and polar display on built-in CRT display. 10cm x 8cm. Includes Hewlett Packard hard shell carrying case. Original price = $13,650.

120 / 240 vac @ 48 - 66 Hz
Dimensions: 16-3/4" x 5-1/4" x 19-7/8"

*** SOLD OUT ***

(EQP) 6152A

Systron Donner 6152A counter / timer. Large 7 digit Nixie tube readout. Frequency range from 0 to 50MHz (DC), 10Hz to 50MHz (AC), 10 to 512MHz on prescaler input. Resolution of 0.1Hz to 1MHz in decade steps. Four inputs. Sensitivity of "A" input 100 mV rms to 200MHz, "D" input 10 mV rms. Period measurements from 1 to 105 periods. Time Interval measurements from 0.1 µs to 108 second. Ratio measurements: fA/fB with multiplier from 1 to 105. Display storage, 500 µs to 5 sec sampling times plus hold, and marker outputs. 15-1/8" x 3-1/2" x 16-3/4". NSN: 6625-00-148-8021. Works fine.

*** REDUCED *** $275 each

332A

Fluke 332A voltage standard. Three ranges: 0 - 10v, 0 - 100v, 0 - 1000v in 100 µV steps. Current and voltage limiting.

• Input: 115 / 230 vac
• Maximum Output: 1,111.1110 volts
• Dimensions: 7" x 19" x 18" rack mount

$1,295

845AB

Fluke 845AB high impedance voltmeter / null detector. Measures DC voltages from 1 microvolt to 1,000 volts in 19 ranges. When used as a null detector at or below 100 millvolts, input impedance is 10 megohms. Operates on 115 vac or internal batteries. Battery may be of limited capacity.

• Dimensions: 8" x 8-1/2" x 9"
• Weight: 10-1/4 lbs

$1,000

(EQP) HP8502A

Hewlett Packard HP8502A transmission / reflection test set. Includes three 8120-2292 cables. 500 KHz - 1.3 GHz, 50 ohm precision power splitter. 0 to 70 dB step attenuator and directional bridge. For use with HP8754A network analyzer. NOTE: Sold only with HP8754A (above).

• Dimensions: 7-1/2" x 2-7/16" x 8"
• Weight: 4 lbs

$1,795

Enlarge Image | Alt Image

(EQP) FLK-5101A

Fluke calibrator, covers most all lab calibration needs. 8-3/4"H x 17"W x 22"D. Excellent condition. Manual available $125.

•The Fluke 5101A Calibrator has a wide range of DC voltages and current: AC voltages, current and dBm: and resistance output which is programmable from the front panel or through the optional remote interface.

•The 5101A has all the features of the Fluke Model 5100A plus an integral storage system of a memory and tape cassette which allows the operator enter or record a program to step the calibrator through a predetermined sequence.

•Some common features of this series is DC voltages of 0 V DC to 1100 V DC and DC current of 10 uA DC to 2 ADC: AC voltages of 1 mV AC to 1100 VAC @ 400 Hz and a 20 VAC maximum 20 kHz to 50 kHz and AC current of 10 uA AC to 2 A AC: and resistance of 1 ohm to 10 Mohm and a four terminal measurement capability of 1 ohm to 10 kohm.

$2900

(EQP) CHRONY-F1

Chrony model F1. Feet per second chronograph. Older style. We cannot test this item. Sold as-is.

$70

Enlarge Image | Close up of Case

(EQP) HP-11652A

Hewlett Packard transmission / reflection kit. 50 ohms. 8407A accessories.

Kit Includes:

8721A Directional Bridge
11652-60009 Power Splitter
Cables and connectors

$350

More Images / Rear View

(EQP) TEK-TM506

Tektronix TM506 6 slot mainframe for TM500 series modular instruments with option 2.

$295

(EQP) HP-183B

Hewlett Packard 183B scope frame. No plug-ins. Rack mountable. 19" x 5-1/4" x 21-38". Weighs 33 lbs. Sold as-is. Original price in 1970: $1925. Our price...

*** SOLD OUT ***

(EQP) EGG-550-1

EG&G Gamma Scientific Model 550-1 radiometer / photometer. Includes 550-21 sensor. Measures: Ft Candle-Sec, Milliphot, MJ/CM2, Ft Candle, Candela, etc. Sold as-is. Does not appear to be 100% operational.

$149

Meter Close-up

(EQP) FC200TV-B

Spectra illumination meter. Includes wand probe. NOTE: Batteries are frozen in holder. Can not test. Sold as-is.

$125

(EQP) HP141T

Hewlett Packard 141T display frame with no plug-ins. Accepts 8550 Series IF and RF section spectrum analyzer plug-ins and Model 1400 Series plug-ins. Lights up. 16-3/4" x 8-3/4" x 18-3/8". Weighs 40 lbs.

$250 each