Meters: RF Watt / Power & Signal Strength

Simpson wattage meter. 0 - 150 watts. Calculates wattage by measuring voltage and current simultaneously. 150v max, 2 amps max. 4 terminals: 2 for voltage, 2 for amps. 4" x 4-5/8", 2-3/4"D hole required. New, but some shelf marks and scuffs.

Highest quality, sealed, ruggedized watt meter. Scales: 0 - 1.0 Linear, 0 - 1.2 Log. Full scale = 100 µadc. 3-1/2" diameter face. 2-3/4" hole required. 1-7/8" behind panel depth. Sunair P/N: 6032-1032-00.

Gates Radio Company panel meter. 0 - 4.0 kilowatts. FS = 100 µadc. Bezel measures 2-7/8" x 3-3/8" x 1-3/4" deep. 2-1/4" c-c mounting studs. Requires 2-3/4" diameter hole. Gates P/N: 632-0928-000.

Weston panel meter. Power 0 - 6 / VSWR 1 - 100. FS = 200 µadc. 4" x 4-1/2" x 1-7/8" deep. Requires 2-5/8" diameter hole. Gates Radio Co. P/N: 632-0548-002.

Modutec VSWR panel meter. Mirrored arc scale.0 - 120 kilowatts, 1 - ∞ VSWR. FS = 100 µadc. 4" x 5" x 1-5/8" behind panel depth. Requires 2-5/8" diameter hole. Harris P/N: 632-0905-000.

Weston panel meter. Carrier 0 - 200. FS = 5 madc. Bezel measures 3-1/2" diameter x 1-7/8" deep. Requires 2-3/4" diameter panel hole. Harris P/N: 632-0245-000.

Modutec SRS SR-380 multimeter. 3700 ohm. FS = 100 µa. Mounts by four, 6/32 studs on rear. 1.75" x 2.237", 1.55" behind panel depth. Requires 1.5" diameter hole.

Varia "S" meter. S2 - S9 to 40 dB over S9. 70's CB era. Fits 1/2" x 11/16" hole. Mounts from rear by ears 1-3/16" c-c. Full scale = 300 µA.

Citizen's band radio "S" meter. Edgewise, vertical mount. No mounting hardware. 2 - 9 "S" units + 20 - 40 dB over "9". Full scale = 2.5 mA. Fits 5/8" x 1-1/4" hole. 1-1/4" behind panel depth. 9,000 pieces available.

Wacline sealed, edgewise meter reads "RF Deviation 1.0 - 0 - 1.0". Full scale is 50 - 0 - 50 µADC. 1" x 2" view area, 3-1/2" behind panel depth.

Radio Engineering Labs meter relay log scale reads "0 - 12" but actual full scale = 0 - 50 µADC, 5k ohm. Adjustable high limit set point. 2-3/4" diameter, 2-1/8" hole. Sealed, shielded case. 1-7/8" behind panel.

Roller Smith antique watt meter. Ruggedized, sealed. Scale: 0 - 200 watts. FS = 200 µadc. Requires 2-1/8" hole. 1-5/8" depth, 2-3/4"D face. Made in the USA.

E.I.L "VSWR" meter. Full scale = 50 mV. 3.5" diameter face. 2.75" hole required. 2.1" behind panel depth. Removed from new equipment.

API dual locking coil meter relay. 0 - 50 µA full scale. Marked from 0 - 20 kw. 3-1/2" diameter. Requires 2-5/8" hole. 2-1/4" behind panel depth. Model 355-C. NOTE: See PDF for full details (Drawing No. 14). NSN: 5945-00-815-5949.

Modutec multimeter. FS = 100 µADC. 2-7/8" x 3-5/8". 1-3/4" behind panel depth, 2-5/8" diameter hole required. Harris P/N: 632-0991-000.

Scales:
• 0 - 50
• 0 - 10
• 0 - 400 RF watts
• 0 - 40 Reflected watts