Synchros Motors

MAGNAVOX Synchro, Differential Transmitter, Aluminum body (style 23) with rear flange mount. Overall length 4.2", diameter 2.23" with Flange diameter 2.25" (0.25" thick), flange is 1.69" from front face and 1.49" from rear pelxi terminal cover. Shaft tapers out at 0.021" angle for 0.184" (0.182" dia) then a threaded (right-hand / class 2A / UNF) tip 0.15" long. Stator Input 115V/90V, 60Hz, 300ma, 8w. Electrical error angular range in minutes is -18.0 to 18.0, Torque gradient per angular degree is 0.035 inch-ounce minimum. Transformation Ratio 0.774 Rotor to Stator Nominal, 3 Front shaft alignment holes (0.085" DIA, 0.156" Deep) in a circle radius of 0.8440" on a flange diameter of 1.0625", second shoulder 0.025". 6 Rear Terminal screws labeled S1, S2, S3, R1, R2, R3; Crimp lugs included.
Schedule B: 9014900000

Alt P/Ns: 950509, 1HDG, 561790-5, 1HDGMK13, 1357264, 7411379P1, MILS2335, MS1HDGMK13, MIL-S-2335, 2136834G1, 2136834G001, VTDX22-39-6A, SK273120, SK139537, 951184, 950512, 561790PC5, 213422PC1, 707862, 5990-00-644-0090
Labeled: MK. 13 MOD. 5 TYPE 1HDG

Singer Gertsch 400 Hz decade synchro resolver bridge. Combines the functions of a decade synchro bridge and a decade resolver bridge into a single unit. A front panel switch changes the unit from one mode of operation to the other. The units are designed for testing control transmitters, differentials (rotors), and torque transmitters as components or for simulating an incremental control transformer in a servo loop. Because of the low output impedance, the bridge is essentially insensitive to pickup and loading errors. The high input impedance allows an actual load to be connected in parallel with the bridge input, providing a test of the component under actual load conditions. Operation consists of setting in the desired angle. No warm-up, no pre-use calibration. The unit is essentially a decade resolver bridge. In the synchro mode, the three-wire input is converted to two voltage signals in a scott-tee transformer arrangement. After conversion, the voltage comparator operates in the same manner as in the resolver mode. Decade synchro / resolver standards combine the functions of a decade synchro standard and a decade resolver standard into a single unit. A front panel switch changes the unit from one mode to another. In system tests, the standard may be used to introduce accurately known inputs for testing auto pilots, aircraft indicators, etc. This technique can also be used to check the response of a servo loop. In component tests, the standard may be used to transmit precise angular data to the test component. As a synchro standard, the unit may be used to test CDX'S, CT'S, TDX'S, TDR'S and TR'S. As a resolver standard, the unit may be used to test RD's and RC's.

• Dimensions: 15"D x 19"W x 5.25"H

Originally sold for $5,510. Our price...