2.1 kv to 9 kv Power Supplies
Fluke Power Supply
0 to 2.1kv DC @ 0 to 15 ma
0 to 2.1kv DC @ 0 to 15 ma
(PS) 412B
Fluke DC power supply. + or -. Output in 0.1v steps. "BNC" front and rear panel output connectors. Works to full output. Reconditioned and guaranteed!
• Output: 0 - 2.1 kv @ 0 - 15 ma
• Dimensions: 3-1/2"H x 17"W x 15-1/2"D
$895
High Power Pulse Generator
200v to 2.5 kv Peak @ 12.5 amps Peak
200v to 2.5 kv Peak @ 12.5 amps Peak
(PS)
VEL360
Velonex high power pulse generator. 200v to 2.5 kv peak @ 12.5 amps peak. 0.05 µS to 3 mS width. 1 Hz - 0.3 MHz PRF. 19" rack width x 22" x 13". Weighs ~ 140 lbs. Model 360.
This unit became inoperable during a final test before shipping. We are now selling as-is, without warranty for a reduced price. Value as a working unit is $2500.
This unit became inoperable during a final test before shipping. We are now selling as-is, without warranty for a reduced price. Value as a working unit is $2500.
$500 each
Triple Voltage Power Supply
0 - 2.5 kv @ 0 - 250 mA, 625 watts
0 - 4.0 kv @ 0 - 200 mA, 800 watts
0 - 2.5 kv @ 0- 250 mA, 625 watts
0 - 2.5 kv @ 0 - 250 mA, 625 watts
0 - 4.0 kv @ 0 - 200 mA, 800 watts
0 - 2.5 kv @ 0- 250 mA, 625 watts
(PS) PS/FMW-01
Glassman 2 kw triple voltage power supply. All programming and monitoring via rear DB-25 connector. 0 - 10v DC controls each supply to full output. Each supply in turn generates 0 - 10v DC in correspondence to voltage that is programmed. Includes output connectors: Alden A600QX36 and manual. We have 20 units available!!
- Input: 3 phase, 48 - 63 Hz, 190v - 225v
- Output 1: 0 - 2.5 kv @ 0 - 250 mA, 625 watts
- Output 2: 0 - 4.0 kv @ 0 - 200 mA, 800 watts
- Output 3: 0 - 2.5 kv @ 0- 250 mA, 625 watts
- Dimensions: 7"H x 19"W x 24"D
$2,900 each
Kepco ABC Power Supply
0 to 2.5 kv @ 2 ma Negative Output
0 to 2.5 kv @ 2 ma Negative Output
(PS) 188-0030
Kepco ABC power supply. 0 to 2.5 kv @ 2 ma negative output. 8" x 14" x 5" high.
$375 each
Spellman High Voltage Power Supply SL3PN1200
3kv DC @ 400 mA / 1220 watts / Reversible Polarity
3kv DC @ 400 mA / 1220 watts / Reversible Polarity
(PS) SLPN1200/10004
Spellman high voltage power supply. 0 - 3kv DC @ 0 - 400 mA. 1220 watts. 220v 1 phase input. Includes HV cable. Brand new! Never used.
SPECIFICATIONS:
Status Indicators: Voltage and Current Control Mode, Interlock Open/Closed, High Voltage Inhibit, Overcurrent and Overvoltage, Arc, Regulation Error, Over temperature, Over Power (optional).
Input: 220v AC ±10%, 50/60Hz
Front Panel Controls: Voltage and current are continuously adjustable by ten-turn potentiometers with lockable counting dials, ON/OFF circuit breaker/lamp, high voltage ON switch/indicator and high voltage OFF switch/indicator. Voltage Regulation:
Temperature Range:
SPECIFICATIONS:
Status Indicators: Voltage and Current Control Mode, Interlock Open/Closed, High Voltage Inhibit, Overcurrent and Overvoltage, Arc, Regulation Error, Over temperature, Over Power (optional).
Input: 220v AC ±10%, 50/60Hz
Front Panel Controls: Voltage and current are continuously adjustable by ten-turn potentiometers with lockable counting dials, ON/OFF circuit breaker/lamp, high voltage ON switch/indicator and high voltage OFF switch/indicator. Voltage Regulation:
- Load: 0.005% of maximum voltage +500mV for full load change
- Line: ±0.005% of full voltage +500mV over specified input range
- Load: 0.01% of maximum current �100�A for full voltage change
- Line: ±0.005% of maximum current for a �10% input line change
- Ripple: 0.1% p-p +1Vrms
- Temperature Coefficient: 100ppm/°C voltage or current regulated. Higher stability is available on special order
Temperature Range:
- Operating: 0°C to 50°C
- Storage: -40°C to 85°�C
- Humidity: 10 to 90% relative humidity, non-condensing
- Stability: 100ppm/hour after 1/2 hour warm-up for both voltage and current regulation
- Metering: Digital voltage and current meters, 31/2 digit �1 least significant digit
- Output Cable: 10' (3.05m) of shielded high voltage cable removable at the rear panel
- AC Line Input Cable: 3-conductor, 12AWG, 6' (1.83m) cable permanently attached to unit
- Dimensions: 600W � 1200W: 31/2"H(2U) x 19"W x 19"D** / (8.9cm x 48.3cm x 48.3cm)
- Weight: 17 to 30 lbs (7.7 to 14kg) depending on model
- Regulatory Approvals: Compliant to EEC EMC Directive and EEC Low Voltage Directive. RoHS Compliant
$6,900 each
High Voltage Power Supply
0 - 3 kv (positive or negative) @ 10 mA
0 - 3 kv (positive or negative) @ 10 mA
(PS) 205B-03R
Bertan high voltage power supply. 0 - 3 kv @ 10 ma max. Reversible output. Digital panel meter displays voltage or current. Front panel 10 turn pot sets voltage and current output. MHv high voltage connector. Operates on 115 vac. Manual and power cord included. Can be remote controlled. Good condition.
• Input: Fixed 115 / 230 vac
• Output: 0 - 3 kv @ 10 ma max
• Dimensions: 3-1/2" x 19" x 14" deep
*** SOLD OUT ***
High Voltage Power Supply
±3kV (positive or negative) @ 0-10mA
±3kV (positive or negative) @ 0-10mA
(PS) TC952
Tennelec high voltage power supply. ±3000V @ 0-10mA. Positive or negative selectable output polarity IV resolution, Includes manual.
• Input: 115vAC
• Output: ±3000V @ 0-10mA
$849 Each
Fluke HV Power Supply
0 to 3.1 kv DC @ 0 - 15 mA
0 to 3.1 kv DC @ 0 - 15 mA
(PS) 415B
Fluke high voltage DC power supply. + or -. Output in 0.1v steps. Zero center voltage meter. "SHV" front panel and "BNC" rear HV connectors. Works to full output. Reconditioned and guaranteed!
- Input: 120 vac, 60 Hz
- Output: 0 to 3.1 kv DC @ 0 - 15 ma
- Dimensions: 19"W x 3-1/2"H x 15-1/2" deep
$1,095 each
Fluke HV Power Supply
0 to 3.1 kv DC @ 0 - 15 mA
0 to 3.1 kv DC @ 0 - 15 mA
(PS) 415B/M
Fluke high voltage DC power supply. + or -. Output in 0.1v steps. Zero center voltage meter. "SHV" front panel and "BNC" rear HV connectors. Works to full output. Reconditioned and guaranteed! Updated modern version of the durable Fluke 3.1 KV power supply. Every shop with vacuum tubes should have one.
- Input: 120 vac, 60 Hz
- Output: 0 to 3.1 kv DC @ 0 - 15 ma
- Dimensions: 19"W x 3-1/2"H x 15-1/2" deep
*** SOLD OUT ***
Power Supply
4.2 kv RMS @ 17 - 55 KHz
4.2 kv RMS @ 17 - 55 KHz
(PS) CHP-2001A
Chirk power supply. Input: 24v DC @ 17 - 52 watts. 4.2 kv RMS @ 17 - 55 KHz. 2-1/8" x 2-3/16" x 2-1/8"H.
$39 each - $36.75 (6+), $33 (25+)
Bertan High Voltage Supply
0 to -3 kv / 0 to 10 mA (Reversible)
(PS) 205A-03R
Bertan high voltage power supply. Reversible polarity. MHV output connector. Analog meter switchable for output voltage or current. Output selected by 1 kv steps and / or 10 turn pot. Remote analog monitoring / control. Used / removed.
• Input: 115 / 230v
• Output: 0 - 3 kv, 0 -10 ma reversible
• Dimensions: 3-1/2"H x 19"W x 9.6" deep
$1,065 each
SR-110 Power Supply
2.5 kv to 3 kv
2.5 kv to 3 kv
(PS)
AR-150A
Brand new Scientific Radio Systems Power
Supply for the SR-110 Kilowatt Amplifier. Supplies 1 amp continuous. 19" wide
(rack mount), very heavy. Get a load of the huge BASLER hypersil transformer.
Some parts like rectifiers, oil cap and bleeder resistor are not included. Sold separately or with RF decks.
Multi-tapped power transformer (TP) 110813 matches any input from 105, 115, 125, 210, 230 & 250
vac.
*** SOLD OUT ***
SR-110 Power Supply
2500v to 3000v
2500v to 3000v
(PS)
AR-150A/C
Brand new Scientific Radio Systems Power Supply for the SR-110 Kilowatt Amplifier. Supplies 1 amp continuous. 19" wide (rack mount), very heavy. Get a load of the huge BASLER hypersil transformer. Some parts like rectifiers are not included. 10uF 4kv filter cap and 210w bleeder resistor are included. The enclosure top is also included with this model. Multi-tapped power transformer matches any input from 105, 115, 125, 210, 230 & 250 vac.
- Primary: 105/115/125/210/230/250 volts
- Secondary: 2500/3000 volts
- Apparent Power: 2500 VA
$1,389 each
DC to DC Converter
Input: 28 vdc - 3 kv / 2 ma
Input: 28 vdc - 3 kv / 2 ma
(PS) B1002
DC to DC converter. 28 vdc input yields 3,000-6,000 vdc out
@ 2 ma. 1" x 2" x 4". Commonly used as CRT HV supply. Removed from
equipment. Sold as is.
$50 each
Power Designs Inc. Model 1570
Power Supply
1 to 3012v / 40 ma output
Power Supply
1 to 3012v / 40 ma output
(PS) 1570
Power Designs Inc. Model 1570 power supply. No manual, no cords. Lights up but no output. Sold as-is.
- Output: 1 to 3012v, 40 ma
- Dimensions: 19"W x 5"H x 18"D
$150 each
Fluke Analog Brute!
±0.5 - 6000v DC @ 20 mA Max / 1v Resolution!
±0.5 - 6000v DC @ 20 mA Max / 1v Resolution!
(PS) 408A
Fluke analog brute! 1v resolution! Good output. Like new inside.
- Output: ±0.5 - 6000v DC @ 20 mA Max / 1v Resolution!
- Dimensions: 8-3/4"H x 17"D x 19" rack width
*** SOLD OUT ***
Kikusui AC Withstanding Voltage Tester
0 to 5 kvac / 0.1 ma to 110 ma in 200 steps
(PS) TOS5050
Kikusui AC withstanding voltage tester. Remote controllable and programmable. Includes power cord and manual.
• Input: 115 vac - 240 vac
• Output: 0 - 5 kvac / 0.1 ma - 110 ma in 200 steps
• Dimensions: 12.6"W x 5.91"H x 14.4"D
• Weight: 33 lbs
$1,795 each
High Voltage Power Supply
Input: 115 vac / 48 - 63 Hz, ±10%
Output: ±3 kv @ 200 ma
(PS) PS/EK03R200-GA1
Glassman high voltage power supply. Positive or negative polarity. Front panel voltage and current limit. Dual LCD meters. Remote connections on rear terminal strip. Includes cord, SHV high voltage cable NOT included. Manual included. Used, excellent condition
- Input: 115 vac, 48 - 63 Hz, ±10%
- Output: ±3 kv @ 200 ma
- Dimensions: 19" x 23" x 3-1/2"
- Axcelis P/N: 210000217
*** SOLD OUT ***
Glassman Power
Supply
±3 kv / 5 kw / 1.7 amps
±3 kv / 5 kw / 1.7 amps
(PS) PS/LH003R1.7J71
Glassman PS/LH003R1.7J71 power supply. 5 kw, ±3 kv. Dual LCD meters. AC input on terminal strip on rear panel.
Front panel voltage & current adjust. Voltage & current meters. Arc quench senses load arc and shuts down HV output for 20 milli-seconds.
Arc count shuts off supply for 5 seconds after 5 arcs @ one per second, then restarts. All functions can be remoted. We have one used unit, includes a manual.
• Input: 208v, 3 phase
• Output: ±3 kv @ 1.7 amps
• Dimensions: 10-1/2"H x 19"W x 24"D
• Weight: 60 lbs
$4,500 each
Fluke 4150A Programmable
High Voltage Power Supply
3 kv - 0 - 3 kv @ 0 - 50 ma
High Voltage Power Supply
3 kv - 0 - 3 kv @ 0 - 50 ma
(PS) 4150A
Fluke Model 4150A programmable high voltage power supply. Does not work. Sold as-is.
- Output: 3 kv - 0 - 3 kv @ 0 - 50 ma
- Dimensions: 19" x 5-1/4" x 21"D
$175 each
Spellman Reversible Power Supply
0-3kv DC @ 666.6 ma
0-3kv DC @ 666.6 ma
(PS) SLSPN2000/10001
Spellman reversible power supply. Controllable by front panel. 2000 watts. Model SL3PN2000. 10 turn pots on voltage & current. Remote controllable from rear DB25 Connector. HV cable ava $250.Front panel HV on & off switch.
- Input: 220v, 1 phase
- Output: 0-3kv DC @ 666.6 ma
- Dimensions: 3-1/2" x 19" rack x 20-1/2" deep
$3500 each
HP DC Power Supply
0 to 4000 vdc @ 50 ma
0 to 4000 vdc @ 50 ma
(PS) HP6525A
Hewlett Packard / Harrison Labs precision, bench / lab, regulated, variable DC power supply with analog volt / amp metering. All solid state, 200-watt, variable high voltage, precision regulated, dc laboratory power supply that can be utilized for any high voltage application in electronic component testing circuit design or repair. The output voltage is set easily and precisely by a three-decade thumbwheel switch plus a thumbwheel vernier providing 0.002% resolution, and a control knob for current adjustments. The dc supply provides constant voltage and / or constant current. The analog meters provide accurate readings of both voltage and current and the output connections are high grade "BNC" connectors to supply the high voltage to your equipment. This is truly a laboratory grade power supply with hum and noise specifications measured in millivolts and supply regulation accurate to ± 0.002% and the power supply is protected from reverse voltage that could be generated by an active load. This is the ideal piece of professional test gear to check out and evaluate any electronic or electrical equipment needing high voltage such as twt's, klystrons, magnetrons, backward-wave oscillators, high-power gas lasers, electron-beam welding devices, etc. Includes copy of manual.
- Output: 0 - 4000v @ 0 - 50 mA
- Dimensions: 20" x 19" x 5.5"H
$789 each
Bertan High Voltage Supply
0 to 5 kv / 0 to 5 ma (Reversible)
0 to 5 kv / 0 to 5 ma (Reversible)
(PS) 205A-05R
Bertan high voltage power supply. Reversible. Analog meter on front panel. MHV output connector.
• Output: 0 to 5 kv / 0 to 5 ma reversible
• Dimensions: 3.5"H x 19"W x 9.6" deep
$1,295 each
Bertan High Voltage Supply
0 to 5 kv / 0 to 5 ma (Reversible)
0 to 5 kv / 0 to 5 ma (Reversible)
(PS) 225-05R
Bertan high voltage power supply. Reversible. Digital meter on front panel. Selectable response to over-voltage condition, shut down or limit. GPIB interface. Manual included.
• Input: 115 / 230v
• Output: 0 to 5 kv / 0 to 5 ma reversible
• Dimensions: 3"H x 19"W x 9.6" deep
*** SOLD OUT ***
Bertan High Voltage Supply
0 to 5 kv / 0 to 5 ma (Reversible)
0 to 5 kv / 0 to 5 ma (Reversible)
(PS) 205A-05R-A
Bertan high voltage power supply. Reversible. Analog meter for voltage or current on front panel. MHV output connector. Works to full output. Note: current reading on meter is 140% of actual current output. Sold as-is.
• Output: 0 to 5 kv / 0 to 5 ma reversible
• Dimensions: 3.5"H x 19"W x 9.6" deep
$1,095 each
Power Supply
0 - 3 kv @ 0 - 120 mA
0 - 3 kv @ 0 - 120 mA
(PS) 2003218-001
Hughes power supply. We have no technical information on this unit. It was removed from a working environment but we sell it as-is, without warranty. Controls through proprietary connector on rear. Analog meters on front panel.
- Output: 0 - 3 kv 0 - 120 mA
- Dimensions: 20" x 19"W x 8"H
$750 each
Korad
Power Supply
0 to 5 kv / 0 - 10 kv
0 to 5 kv / 0 - 10 kv
(PS) D910032-901Q
0-5 kv Korad compact high voltage, variable, rack
mount supply from Los Alamos Lab surplus. Turns counting
voltage control damaged. 7" high, 18" deep. Has 2,500v
0.6 kva transformer. 115 vac input. Sold as-is.
* REDUCED * $395 each
(PS) D910048-901
0-10 kv Korad compact high voltage supply similar
to 5kv unit above. Sold as-is.
* REDUCED * $695 each
Lambda Power Supply
5 kv @ 1 amp
5 kv @ 1 amp
(PS) SX502S-5KV
Lambda EMI power supply. Guaranteed working condition. We do not stock specialty connectors.
- Input: 108 - 250v AC @ 23 amps, 50/60 Hz, 3 ph
- Output: 5 kv @ 1 amp, 5 kw
- Dimensions: 20"D x 19"W x 5.25"H
*** SOLD OUT ***
Lambda Power Supply
-5 kv @ 2 amps
-5 kv @ 2 amps
(PS) SX1002S-5KV-NEG-DC-AIR
Lambda EMI power supply. Guaranteed working condition. We do not stock specialty connectors.
- Input: 108 - 250v AC @ 45 amps, 3 ph, 50/60 Hz
- Output: -5kv @ 2 amps, 10 kw
- Dimensions: 20"D x 19"W x 9"H
$2,100 each