Stamped RF Enclosures
Builders Box
(FRI) 8775262-501
Builders box. 2 access holes on bottom for trimmer adjustment. 4 mounting holes, threaded, 1" x 2-3/8" grid with Mil-Spec. "TNC" female connectors on each end. 2" x 5" x 1-7/16"H. Remove circuit board on standoffs.
$15 each
One Piece Aluminum Cover
(ENC) AL3X5
One piece aluminum cover. Rounded corners. 2-7/8" x 4-7/8" x 3-7/169" inside dimensions. 1/2" hole as picture for I/O connector. Excellent shielded cover for electronic project.
$10 each
RF Enclosure
Silver
Silver
(ENC) RF2X2
Silver RF enclosure. 2-1/4" x 2-1/4" flange top/bottom. 1-7/8" high. Side hole predrilled for flanged N connector. Fingerstock rimmed hole accepts .74" diameter probe.
$25 each
Copper Sheet
(PCB) CU12-005
Copper sheet. 12" wide rolls. 0.005" thick. 1 square foot weighs 0.2356 lbs (3.6 oz). Wrinkles & dents, no extra charge.
$9 per foot
Stamped Solid
Copper Shield Can
Copper Shield Can
(ENC) 420-100575
Stamped solid copper shield can. 2" x 1.58" x 0.43" high. 0.22" wall thickness. Ground lead soldered to inside. Painted with black enamel.
$2 each - $1.75 (10+), $1.50 (100+)
Stamped Solid
Copper Shield Can
Copper Shield Can
(ENC) 420-27467
Stamped solid copper shield can. 2" x 1.58" x 0.538" high. 0.22" wall thickness. 2" ground lead soldered to inside. Painted with black enamel.
$2.25 each - $2 (10+), $1.75 (100+)
Stamped Solid
Copper Shield Can
Copper Shield Can
(ENC) 420-27465
Stamped solid copper shield can. 2" x 2" x 0.44" high. 0.22" wall thickness. Ground lead soldered to inside. Painted with black enamel.
$2.50 each - $2.25 (10+), $2 (100+)
Stamped Solid
Copper Shield Can
Copper Shield Can
(ENC) 420-27762
Stamped solid copper shield can. 3" x 2.5" x 0.4" high. 0.26" wall thickness. 2" Ground lead soldered to inside. Painted with black enamel.
$3.25 each - $3 (10+), $2.50 (100+)
Power Splitter / Combiner
"SMA" Female Connectors
"SMA" Female Connectors
(RF) PD2
Wilman Co. power splitter / combiner. 3 (three) "SMA" female connectors. Aluminum case with removable lid. Installed stripline circuit board easily removed with 3 screws. Inside milled out to 1-1/4" x 1-3/8" x 5/16". Outer dimensions: 2" x 2" x 3/4". All remaining units are stamped PD1.
We believe this power splitter / combiner is made for 800 - 900 MHz range. 500 pcs available.
We believe this power splitter / combiner is made for 800 - 900 MHz range. 500 pcs available.
$8.95 each - $8 (3+), $6.50 (25+), $5 (100+)
2 Way Spitter
(RF) 60-905-0039
Sealectro 2 way splitter. Body only. No internal circuitry. Coaxial crimp input. Output: 2 unidentified male connectors.
$15 each - $13.30 (6+)
RF Enclosure Lid
(ENC) SPL1.75
RF enclosure lid. Silver plated. 1.75" x 1.22".
$1 each