Electrical Insulation & Sealing Tapes
Polyimide Tape
Similar to DuPont™ Kapton® brand
Polyimide film
Similar to DuPont™ Kapton® brand
Polyimide film
Brand new, factory fresh polyimide adhesive tape with DOW® adhesive.
Available off the shelf in six widths: 3/16", 1/2", 3/4", 1", 1-1/2" and 2.188" wide.
Available off the shelf in six widths: 3/16", 1/2", 3/4", 1", 1-1/2" and 2.188" wide.
| • Voltage Rating: 7kv (per layer) • Thickness: 0.025mm (0.06mm total) • Roll Length: 33 Meters • Insulation Resistance: 1x10 6 megohms |
• Tensile Strength: 55 N / 10mm • Elongation: 45% • Adhesive to steel: 2.2 N / 10mm • Temperature Class: 180ºC |
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Permacel® 1-Mil
Polyester Film
P-252 / P-253 / P-256
Electrical Insulating Tapes
P-252 / P-253 / P-256
Electrical Insulating Tapes
The universal standard! Engineered for fine wire applications requiring a non-corrosive tape. Thin, conformable, tough, highly tear resistant. Recommended for insulating connections, crossover insulation and barrier insulation on small bobbin wound coils; and for holding layer and barrier insulation on stick wound coils. Widely used for coil end insulation and coil outer protective wraps on stick wound and small form wound coils. Also used for end turn bundling and phase insulation on small sub-fractional horsepower motors.
| • Insulation class: 130ºC • Backing material: 1-mil polyester film • Adhesive: Rubber / resin, thermosetting, semi-cured • Colors: P-256 Yellow • Total tape thickness: 2.5 mils / 0.063 mm |
• Tensile strength: 25 lbs. per in. / 4.5 kg per cm • Adhesion to steel: 50 oz. per in. / 560 gm per cm • Dielectric strength: 5,500 volts • Length: 72 yards long |
|
|||||||||||||||||||||||||||||||||||||||||||||||||
Fiberglass Fabric
Adhesive Tape
Adhesive Tape
Brand new,
factory fresh Fiberglass adhesive tape with DOW® adhesive.
On the shelf in 4 widths: 0.5", 0.75", 1" and 1.5".
On the shelf in 4 widths: 0.5", 0.75", 1" and 1.5".
| • Voltage Rating: 2.5kv (per layer) • Thickness: 0.14mm (0.2mm total) • Roll Length: 33 Meters • Insulation Resistance: 1x10 6 megohms |
• Tensile Strength: 240 N / 10mm • Elongation: 5% • Adhesive to steel: 4.2N / 10mm • Temperature Class: 180ºC |
|
||||||||||||||||||||||||||||||||||||||||||
Double Sided Tape
(TAP) 665
Scotch™ double sided tape. Permanent - linerless. Industrial grade. 3/4" x 1,296" (36 yards). 19mm x 32.9m. 3.5 mil thick. Low temperature.
$5 per roll - $4.50 (12+ rolls)
Kapton® "Fluorglas"
Polymide Tape
Polymide Tape
(TAP)
2345-1
Kapton® "Fluoglas" polymide tape. Similar to Kapton ® / 811. 1/2" (12.7mm) wide x 36 yards. 1mm thick. Made by Dodge Ind.
$20 per roll
Fiberglass Rubber Tape
(TAP) RL6000SB
1" electric insulation tape (no adhesive), .018" thick x 60 ft long. Red / orange color, fiberglass / rubber. No temp or voltage rating.
$8 per roll
High Voltage Plastic
Insulating Tape
Insulating Tape
(TAP)
400-461
High Voltage Engineering Corporation high voltage plastic insulating
tape. 1" wide,
0.020" thick, 1,296" long. NO ADHESIVE. 1kv rating.
$10
per roll
3M Double-Sided Pads
(TAP) 240-26525
3M double-sided pads. 1/2" x 1-5/8", 0.045" thick. Sold per piece, stored on reels. NOTE: Minimum order is 10 pcs.
10¢ per pc - 8¢ (50+), 6¢ (250+)
Chomerics T-404 Mylar
with Backing
with Backing
(TAP) T-404
Chomerics T-404 mylar with backing. 2" wide x 400 ft. 0.002" thick. No adhesive. Film is clear and colorless. Roll 3-3/8" core diameter, 8-1/2" diameter.
*** SOLD OUT ***
Fralock Tape Nomex Mylar
5" Diameter Roll
5" Diameter Roll
(TAP) T907-3-1
Fralock tape. Nomex mylar. 3 mil, 1.85" wide, white fabric. 5" diameter roll. Mfg. P/N: 240-27754.
$65 per roll