Pulleys & Sheaves
"U" Groove Pulley Sheave w/Bore
(SHW) 4274-C
Lebus International "U" groove pulley sheave with bore. Military surplus. Gray enamel coating. 23.25" outside diameter. 4.5" diameter bore, 5.83" outside diameter. Weighs approximately 100 lbs as pictured. NOS. Alt. P/N: 2818, 8593-D (Lebus). NSN: 3020-01-325-3382. NOTE: Slight oxidation visible due to age. See pics for details. Only one available.
$1,500
Snatch Block with Hook & Thimble
(SHW) SB2.5
Snatch block with hook and thimble with 2-1/2" pulley. For 3/8" rope. Thimble for 1/4" - 5/16" wire rope.
$23.95 each
Steel Hook
(SHW) HOOK2.5
Steel hook. 2-1/2" across. 15/16" hook opening. 1/2" eye.
$3 each
Clevis Hook
(SHW) CH.25
Clevis hook. Galvanized. 1/4" pin. 5/16" opening. Great for chains.
$4 each
Snatch Block with Hook and Double 2-1/2" Pulley
(SHW) HW-262-B5
Snatch block with hook and double 2-1/2" pulley. For 3/8" wire rope.
$35 each
3" Pulley
(SHW) 03050
"Blocks" 3" pulley for 3/8" cable. 1-1/2" x 11/16" mounting centers. Out of Wichita Falls, Texas.
$10 each
Block Pulley & Hook
(SHW) 03070
"Blocks" 03070 block pulley and hook. 3" pulley for 3/8" cable.
$12 each
Block Pulley & Eye
(SHW) 03040
"Blocks" 03040 block pulley and eye. 3" pulley for 3/8" cable. 7/8" eye hole.
$10 each
Block Pulley & Eye
(SHW) 01540
"Blocks" 01540 block pulley and eye with 9/18" hole. 1-1/2" pulley for 1/4" cable.
$9 each
Block Pulley and Hook
(SHW) 01570
"Blocks" 01570 pulley and hook. 1-1/2" pulley for 1/4" cable. Out of Wichita Falls, Texas.
$9 each
Block Pulley
(SHW) 01550
"Blocks" 01550 pulley. 1-1/2" pulley for 1/4" cable. 5/8" x 1-1/2" mounting centers. Out of Wichita Falls, Texas.
$5 each
Timing Belt Pulley
56 Tooth
56 Tooth
(SHW) TBP56-6.6
Timing belt pulley. 56 tooth. 3/4" wide. 6-5/8" diameter. 3/8" pitch. 1/2" bore.
$50 each
3 Belt Pulley
(SHW) 3MVB74Q
Browning 3 belt pulley. Made for large transmitter
blower on Gates transmitter. 7-3/4" diameter x 3-1/4" high. 2-3/4" diameter shaft
boring. New, unused. Gates P/N: 438-0096-000.
$39 each
Steel Timing Pulley
with Bushings
with Bushings
(SHW) 21L050
Steel timing pulley with bushings. Some oxidation of steel (see pic), new surplus. 1/2" bore, 1/2" belt. 21 teeth, 3/8" pitch. 1.436" x 2.73" overall.
$25 each
Shaft Bushing
(SHW) SDS1-1/8
T.B. Woods 1-1/8" shaft bushing. 2-1/8" diameter.
$20 each
QD Sheave
(SHW) 1B38-SH
QD sheave. 4-1/8" diameter. 1-3/4" bore. Bushing not included.
Gates P/N: 938-0086-000.
$25 each
QD Sheave
(SHW) 1B44-SH
QD sheave. 4-7/8" diameter. 1-3/4" bore. Bushing not included.
$30 each
V Belt Sheave
(SHW) 802BSK
T.B. Woods V-belt sheave. 2 groove SK bushing. Shaft bushing not included. 8-3/8"D. Gates P/N: 438-0131-000.
$39 each
"Printer" Idler Roller
(MIS) 421764-G01
"Printer" idler roller. Rubber jacket. Stainless form. 0.895" diameter x 10-5/16" long. 0.556" inside diameter. Made for Harris. NSN: 6740-01-146-0303.
$10 each
Stainless Steel Roller
(SHW) 332131
Stainless steel roller. 0.188" (3/16") diameter center hole, 0.327" vee diameter, 0.498" overall diameter, 0.233" wide. NSN: 5815-00-409-4814.
$1.90 each - $1.65 (10+)
Pulley
(SHW) BACP30F10
Arvan pulley. Anti-friction bearing. Aircraft end use. Bakelite, non-metalic. 2.625" outside diameter. 0.314" wide groove. 0.311"D bore. Alt P/Ns: R30F10, MS20221-1, 20221-1. NSN: 3020-00-528-0513.
$5 each
Flywheel & Shaft
(SHW) 411040
Flywheel & shaft. 20 oz. 2-1/8"D x 0.82"H weight. 8" x 1/4" stainless steel shaft. NSN: 5835-992-8900.
$25 each