Remote Controlling Gear Motors
Gear Motor
24 vac / 28 rpm
24 vac / 28 rpm
(IRV) B00003
Gear motor for operating rotary switches. 24 vac, 28 rpm. It has a spring loaded pawl that retracts when power is applied and engages when power is removed to stop the motor. Plenty of torque due to gear reduction. NOT REVERSIBLE.
Mounted in a 4-1/4" x 3-1/2" x 5"H aluminum frame with mounting tabs. Motor measures: 2-5/8" x 3-1/4" x 4". 1/4"D shaft.
Mounted in a 4-1/4" x 3-1/2" x 5"H aluminum frame with mounting tabs. Motor measures: 2-5/8" x 3-1/4" x 4". 1/4"D shaft.
$59 each
70 rpm Loaded Speed
Reversible Gear Motor
Reversible Gear Motor
(MOT) B00005
24 vac (50 / 60 Hz) operated motor is used in the SRS Antenna Couplers to tune inductors, switches and vacuum caps.
Healthy torque manages any component in their line. 70 rpm at 24 vac 60 Hz, with full rated load. Lower voltage to lower speed also decreases torque. Double 1/4" shaft exits each side of gearbox. Mounts by threaded post sockets on front spaced in a 1-9/16" square.
Max dimensions 3-3/4" high x 2-7/8" wide x 3-1/2" deep from mounting posts to electrical terminals on back. MK Model QFS3420R. Includes starting cap and wiring instructions.
Limited quantity!
Suitable for almost any remote tuning application of a vacuum cap, rotary inductor or ceramic switch.
Healthy torque manages any component in their line. 70 rpm at 24 vac 60 Hz, with full rated load. Lower voltage to lower speed also decreases torque. Double 1/4" shaft exits each side of gearbox. Mounts by threaded post sockets on front spaced in a 1-9/16" square.
Max dimensions 3-3/4" high x 2-7/8" wide x 3-1/2" deep from mounting posts to electrical terminals on back. MK Model QFS3420R. Includes starting cap and wiring instructions.
Limited quantity!
Suitable for almost any remote tuning application of a vacuum cap, rotary inductor or ceramic switch.
$79 each