High Voltage Connectors - In Stock - Surplus Sales of Nebraska

High Voltage Connectors

(CNE) D100YR11

Alden double circuit polarized connector. 15 kv. Tested to 20 kv. Dual female - inline. Made for Laser Industry. Excellent quick disconnect system where complete disconnection of both HV and ground wires simultaneously are desired. Pigtails measure 10" long. Uses #21 wire.

$5 ea - $4.75(6+), $4.50(25+), $4(100+), $3.35(500+)

Click here for Movie

Click here for PDF file (Specs & Dimensions)

(CNE) 8101SET/RED

Our popular 15kv connector sets made by Alden are the staple in many HV disconnect projects around today. We originally picked up this line to replace hard-to-find Millen connectors. The panel mount female (right side) has a 12" lead to HV source in the chassis. The male connector has a 36" lead. Color: Red Uses #21 wire.

Male and female cables available separately, call or email for pricing.

Reduced Price!!!

$43 each - $39 (10+)

Click here for PDF file (Specs & Dimensions)

(CNE) 602-303

Brand new connector set!! 30kv version of our famous Alden connector set. 24" pigtail on panel mount female and 48" long on male lead.

Female body 1/2" O.D., 1-1/2" long ahead of flange, 1-3/4" behind, 3-3/8" overall. Male plug 2-1/2" long. Uses #21 wire.

$75 each - $70 (6+), $65 (25+)

Click here for Movie

(CNE) D200VX60

Alden coax connector. Black. 15 kv. Dual male - inline. Coax - Judd, 105ºC, 22 AWG stranded center. Short connector: 0.305"D, coax center. Long connector: 0.355"D, coax braid. Pigtails measure 60" long. Use this for the convenience of 1 lead. Mates with D100YR11. (above). Uses #21 wire.

$26 each - $25 (6+), $23 (25+), $20 (100+)

(CNE) MILLEN37501

Millen high voltage connectors have been around for 50 years. Low loss mica composite material for RF and HV applications. Sold only as a set. 1-1/2"L x 3/4"W. 1/2" behind panel solder lug. 1-3/16" c-c mounting holes. Male/wire end: 3/4"D x 1"H.

*** SOLD OUT ***

(CNE) MILLEN/SR

Millen high voltage connectors have been around for 50 years. Brand new item. Hard to find RED standard Millen connectors. Male and female set. Sold only as a set. 1-1/2"L x 3/4"W. 1/2" behind panel solder lug. 1-3/16" c-c mounting holes. Male/wire end: 3/4"D x 1"H.

*** SOLD OUT ***

(CNE) MILLEN/SET

Millen high voltage connectors have been around for 50 years. Male and female set of the infamous Millen high voltage connector BLACK. Sold only as a set. 1-1/2"L x 3/4"W. 1/2" behind panel solder lug. 1-3/16" c-c mounting holes. Male/wire end: 3/4"D x 1"H. Only 5 left.

*** SOLD OUT ***

(CNE) MILLEN/B

Millen high voltage connector. Brown female jack portion as pictured. 1-1/2"L x 3/4"W. 1/2" behind panel solder lug. 1-3/16" c-c mounting holes. Male/wire end: 3/4"D x 1"H.

$20 each

Enlarge Image

(WHV) OLE36

Rowe 7 pin male high voltage connector. 10 feet long. 1RMC1615p insert.

$175

Enlarge Image | Alt Image

(WHV) C-PL259-4

High Voltage interconnect cable. END 1: Type "C" shell with .45" OD x 1.66"L. Female pin insert. END 2: PL259 with 8.5"L insert. 4’ long.

$110

More Images

Click here for PDF file

(CNE) 167-4358-20F

Reynolds series 310 double ended high voltage shielded cable assembly.

• Voltage Rating: 15kv DC @ 70,000 ft
• Current Rating: 10 amps
• Temp: -40 to 85°c
• Polarization: 180° (Cond. 1)

• Bayonet Coupling: Nickel plated brass
• Connector: 167-4356 both ends, gold plated brass
• Length: 20 ft

$245 each

More Images

(CNE) 167-4360-15FS

Reynolds series 310 single ended high voltage shielded cable assembly.

• Voltage Rating: 15kv DC @ 70,000 ft
• Current Rating: 10 amps
• Temp: -40 to 85°c
• Polarization: 180° (Cond. 1)

• Bayonet Coupling: Nickel plated brass
• Connector: 167-4356 on one end, other end open pig tail
• Length: 15 ft

$145 each (15FS)

More Images

Click here for PDF file

(CNE) 178-7027-15F

Reynolds series 311 double ended high voltage shielded cable assembly.

• Voltage Rating: 15kv DC @ 70,000 ft
• Current Rating: 10 amps
• Temp: -40 to 85°c

• Polarization: 135° (Cond. 3)
• Bayonet Coupling: Nickel plated brass
• Length: 15 ft

$185 each

Enlarge Image

(CNE) 1064-1

Kings QD panel jack. 10 kv. 2.5" overall length. 1/2-28 NEF mounting thread. Mates with Kings 1065-1.

$17 each - $15 (6+)

Enlarge Image

(CNE) 815-4150-001

Solid brass corona cap or 200 amp contact. Threaded (10-24). Flat bottom, round top. 1"D x 1-1/2"H.

$67 each

Enlarge Image

(CMS) 973106A-18-420P

Amphenol high voltage connector. Single pin plug. Size 18. Straight, solfer termination. 1.25 kv rating, 23 amp. 22 - 16 AWG wire gauge. Alt. P/N: 712288-276. NSN: 5935-00-803-4305.

$45 each

Enlarge Image | Connector Close-up

(WCC) PJB

PJB Mammoflex M1 cable. Amphenol 97-3055-22-12 HV connector. 17 kvac / 24 kvdc, 1 - #12 contact. 12 foot cable. Internal beehives: 3/8" O.D. & 3/4" O.D. Inside diameter of inner connector: 1" O.D. Inside diameter of outer shell: 1-3/8" O.D. Only one available.

$295

Close-up of Connector

(CNE) 178-7038-1FR

Reynolds bulkhead receptacle with attached pig tail shielded cable assembly. Mates with 310 or 311 series bayonets with corresponding polarization. Requires 1/2" panel mount hole.

Length is 12" with 180° (Cond. 1)

*** SOLD OUT ***

(CNE) 178-7038-1.25FR

Length is 15" polarization is 135° (Cond. 3)

$20 each

(CRF) 1709-1

Kings "SHV" style double bulkhead jack. Nickel plated, gold pin, PTFE dielectric. Neoprene gasket.

$29 each

Enlarge Image

(CNE) 167-9388-0F-6N

Reynolds discharge resistant cable connector. Has two 167-9386 connectors. 5" long. NSN: 5995-01-143-7782.

$165 each

(CRF) KV-79-22

Kings SHV style high voltage bulkhead female jack. PTFE dielectric. 2-1/2" long body.

$45 each

(EQP) HAR-938-4203

Broadcast Engineers "Ground Hook" for taking to ground potentially all of those nasty unknowns inside your transmitter. 5 foot long, 10 AWG insulated ground cable attached to a 11" long phenolic rod with a "J" hook. Made by Harris for distribution with broadcast transmitters.

$24 each

Enlarge Image | Close-up View

(CNE) 73A100738-1

Anode connector. 12" lead.

$2.50 each - $2 (10+), $1.50 (100+)

(CNE) 404-0368

High voltage CRT anode connector. 18" lead wire.

$3 each - $2.50 (10+)

Enlarge Image

(TUA) SK-126

Varian high voltage connector. 15 foot RG59 cable. 1" diameter body. Harris P/N: 620-0548-000.

$95 each

(CRF) KP8020-730-40

Kings high voltage connector. 40" Belden 9267 triax. 75 ohm. 0.892" inside diameter.

$275 each

(CNE) 10-42310-2P

Bendix high voltage panel mount connector. Solder cup terminal. Flange mount. 0.621" O.D., 0.454" I.D. NSN: 5935-00-463-7090.

$15 each - $13.40 (6+)

(CNE) 4RMC1221S

Rowe high voltage connector. 6 pin female with contacts. 4 hole flange.

$20 each

(CNE) 4RMC1221S/SR

Same as left but includes backshell / strain relief.

$25 each

(CNE) 1RMC1615P

Rowe unique 7 conductor connector system used where multiple conductors of high voltage are necessary in a single connector. This one is rated at 15kv, 7 amps @ 70,000 feet, -55ºC to 125ºC and is prefabricated with 7" pigtail, & backshell. $150 factory cost. Female mating connector not included but available from the factory.

$12 each - $10 (6+), $8.75 (25+)

Enlarge Image

(CNE) 97-3106A-18-420S

Amphenol industrial high voltage connector. Includes metal olive drab backshell, solder socket. Used, removed from working environment with small section of previous cable left attached. Fits Varian VacIon controller. Alt P/N: MS-3106A-18-420S.

$65 each

Click here for Movie

Enlarge Image

(EQP) 606

Shorting pin. Travels 1-1/2". Solid copper piston is tapped 5/16". 6-3/4" overall length (extended). Units are new but somewhat oxidized. Harris P/N: 464-0031-000.

$45 each