Green Pushbutton Switch

Swann 42 Series Pushbutton Switch (SWP) SWANN-G

Green Pushbutton Switch

Part Number:
(SWP) SWANN-G

Product Details:
Swann 42 Series push-on / push-off maintained pushbutton switch. SPDT - break before make. 250v AC, 10 amp. 12v green illuminated pushbutton. 1.45"H x 2.69"L x 0.57"W. Fits 0.46"D hole. 1/4" "QC" spade terminals.

This is a unique pushbutton switch. The manufacturer has a pilot lamp, that illuminates the colored button, that is wired to common and N.O. Contacts. The pilot lamp is 12v DC. The contact is break before make. If you operate a 12v DC multi-pole relay with the NC contact, and use one set of contacts in series with the pilot lamp terminals and a 12v DC source, the lamp will illuminate the button in one position. Then when you change the switch position, because there is a moment between poles when both contacts are open, the pilot voltage does not short. By utilizing the opposite contacts on the relay, you essentially have a maintained switch the will illuminate when on, and go dark when off.

240v AC / 10 amp / SPDT

1/4" "QC" spade terminals

Fits 0.46"D hole

1.45"H x 2.69"L x 0.57"W

Manufactured by

Swann

Share this page

$10.00 / Each

$9.00 / 6 Each

$8.00 / 25 Each

$7.00 / 100 Each

Ground Shipping Promotion on Orders over $100

Green Pushbutton Switch

Green Pushbutton Switch

Related Products

Syncor Military Battery Charger

1162 ohm 1% 3w Wire Wound Resistor

"SMA" Bulkhead Jack Receptacle

Universal Voltronics Corp.
10 kvdc @ 5.5 ma

Featured Products

Roller Inductor Wheel

Lawrence L−300 Oper / Maint

RF Coil

HP 616A−B Ultra−High Frequency Signal Generator Illustrated Parts